Home » Hardware » schede video » VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 11)
scheda video VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 11)
modello: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 11)(id del modello: 667)
eventuali altri nomi del dispositivo:
VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 01)
ASUSTeK Computer Inc. K8M890CE/K8N890CE [Chrome 9]
marca:
VIA Technologies, Inc.
codice VendorID:ProductID del prodotto:
1106:3230
anno di commercializzazione:
2003
interfaccia:
non specificato
testato con:
Parabola GNU/Linux
Trisquel 5.5 Brigantia
testato con il seguente kernel libre:
5.4.12-gnu-1
3.0.0-17-generic
come funziona con il software libero?
funziona, ma senza accelerazione 3D
driver liberi usati:
viafb
Descrizione:

The old insertion with Trisquel 5.5 says it doesn't work, but it may have changed over time. On Parabola with the libre kernel the via driver is missing so it doesn't work except for the framebuffer console but i will do more tests with a different distro to make sure.

lspci -vmmnn

Slot:	01:00.0
Class:	VGA compatible controller [0300]
Vendor:	VIA Technologies, Inc. [1106]
Device:	K8M890CE/K8N890CE [Chrome 9] [3230]
SVendor:	ASUSTeK Computer Inc. [1043]
SDevice:	Device [81b5]
Rev:	11

lspci -nnk

01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] [1106:3230] (rev 11)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81b5]
	Kernel modules: viafb

lspci -vvnnk

01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] [1106:3230] (rev 11) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. K8M890CE/K8N890CE [Chrome 9] [1043:81b5]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min)
	Interrupt: pin A routed to IRQ 11
	NUMA node: 0
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 1: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
	Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [70] AGP version 3.0
		Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>

Write below your motivation

I contenuti di questa pagina sono di Pubblico Dominio. (leggi la pagina CC0 per informazioni dettagliate). Chiunque è libero di copiare, modificare, pubblicare, usare, vendere, o distribuire tale contenuto per qualsiasi fine, commerciale o non commerciale, e con ogni mezzo.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information