Home » Hardware » Κάρτες γραφικών » VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 11)
Κάρτες γραφικών VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 11)
Μοντέλο: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 11)(Κωδικός id του μοντέλου: 667)
Άλλα πιθανά ονόματα της συσκευής:
VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 01)
ASUSTeK Computer Inc. K8M890CE/K8N890CE [Chrome 9]
Κατασκευαστής:
VIA Technologies, Inc.
Κωδικός Κατασκευαστή:Κωδικός Προϊόντος:
1106:3230
Έτος εμπορικής κυκλοφορίας:
2003
Διεπαφή:
μη-διευκρινισμένο
Δοκιμάσθηκε με:
Parabola GNU/Linux
Trisquel 5.5 Brigantia
Δοκιμάσθηκε με τον εξής ελεύθερο πυρήνα:
5.4.12-gnu-1
3.0.0-17-generic
πώς δουλεύει με το ελεύθερο λογισμικό;
Λειτουργεί, αλλά χωρίς επιτάχυνση 3D
Ελεύθεροι οδηγοί/driver που χρησιμοποιήθηκαν:
viafb
Περιγραφή:

The old insertion with Trisquel 5.5 says it doesn't work, but it may have changed over time. On Parabola with the libre kernel the via driver is missing so it doesn't work except for the framebuffer console but i will do more tests with a different distro to make sure.

lspci -vmmnn

Slot:	01:00.0
Class:	VGA compatible controller [0300]
Vendor:	VIA Technologies, Inc. [1106]
Device:	K8M890CE/K8N890CE [Chrome 9] [3230]
SVendor:	ASUSTeK Computer Inc. [1043]
SDevice:	Device [81b5]
Rev:	11

lspci -nnk

01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] [1106:3230] (rev 11)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81b5]
	Kernel modules: viafb

lspci -vvnnk

01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] [1106:3230] (rev 11) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. K8M890CE/K8N890CE [Chrome 9] [1043:81b5]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min)
	Interrupt: pin A routed to IRQ 11
	NUMA node: 0
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 1: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
	Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [70] AGP version 3.0
		Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information