Home » Hardware » cartes graphiques » VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 11)
carte graphique VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 11)
modèle: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 11)(ID du modèle: 667)
autres noms possibles du périphérique:
VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 01)
ASUSTeK Computer Inc. K8M890CE/K8N890CE [Chrome 9]
vendeur:
VIA Technologies, Inc.
VendorID:ProductID du périphérique:
1106:3230
année de commercialisation:
2003
interface:
non-spécifié
testé sur:
Parabola GNU/Linux
Trisquel 5.5 Brigantia
testé avec le kernel libre suivant:
5.4.12-gnu-1
3.0.0-17-generic
A quel point cela fonctionne-t-il avec du logiciel libre ?
fonctionne, mais sans accélération 3D
pilote libre utilisé:
viafb
Description:

The old insertion with Trisquel 5.5 says it doesn't work, but it may have changed over time. On Parabola with the libre kernel the via driver is missing so it doesn't work except for the framebuffer console but i will do more tests with a different distro to make sure.

lspci -vmmnn

Slot:	01:00.0
Class:	VGA compatible controller [0300]
Vendor:	VIA Technologies, Inc. [1106]
Device:	K8M890CE/K8N890CE [Chrome 9] [3230]
SVendor:	ASUSTeK Computer Inc. [1043]
SDevice:	Device [81b5]
Rev:	11

lspci -nnk

01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] [1106:3230] (rev 11)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81b5]
	Kernel modules: viafb

lspci -vvnnk

01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] [1106:3230] (rev 11) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. K8M890CE/K8N890CE [Chrome 9] [1043:81b5]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min)
	Interrupt: pin A routed to IRQ 11
	NUMA node: 0
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 1: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
	Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [70] AGP version 3.0
		Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>

Write below your motivation

Le contenu de cette page est dans le Domaine Public (voir la page CC0 pour plus d'informations). Quiquonque est libre de copier, modifier, publier, utiliser, vendre ou distribuer le texte , quelques soit le but et le moyen.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information