Home » Hardware » video cards » VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 11)
video card VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 11)
Modell: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 11)(Modell-ID: 667)
Andere mögliche Gerätenamen:
VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 01)
ASUSTeK Computer Inc. K8M890CE/K8N890CE [Chrome 9]
Hersteller:
VIA Technologies, Inc.
Hersteller-ID:Produkt-ID des Gerätes:
1106:3230
Jahr der Markteinführung:
2003
Schnittstelle:
not-specified
überprüft mit Distribution:
Parabola GNU/Linux
Trisquel 5.5 Brigantia
Überbrüft mit folgendem freien Betriebssystemkern (Libre Kernel):
5.4.12-gnu-1
3.0.0-17-generic
Funktioniert einwandfrei mit Freie Software?
Funktioniert, aber ohne 3D-Beschleunigung
Verwendete Freie Firmware/Treiber:
viafb
Beschreibung:

The old insertion with Trisquel 5.5 says it doesn't work, but it may have changed over time. On Parabola with the libre kernel the via driver is missing so it doesn't work except for the framebuffer console but i will do more tests with a different distro to make sure.

lspci -vmmnn

Slot:	01:00.0
Class:	VGA compatible controller [0300]
Vendor:	VIA Technologies, Inc. [1106]
Device:	K8M890CE/K8N890CE [Chrome 9] [3230]
SVendor:	ASUSTeK Computer Inc. [1043]
SDevice:	Device [81b5]
Rev:	11

lspci -nnk

01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] [1106:3230] (rev 11)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81b5]
	Kernel modules: viafb

lspci -vvnnk

01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] [1106:3230] (rev 11) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. K8M890CE/K8N890CE [Chrome 9] [1043:81b5]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min)
	Interrupt: pin A routed to IRQ 11
	NUMA node: 0
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 1: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
	Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [70] AGP version 3.0
		Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information