Home » Hardware » impressoras » Epson ME OFFICE 510
impressoras Epson ME OFFICE 510
Modelo: Epson ME OFFICE 510(ID do modelo: 2142)
outros possíveis nomes do dispositivo:
Seiko Epson Corp.
subtipo (laser, inkjet, ..):
jato de tinta
código VendorID:ProductID do dispositivo:
ano de comercialização:
não especificado
testado com:
Parabola GNU/Linux
testado com o seguinte kernel livre:
compatibilidade com software livre:
Ela adota alguma técnica para controlar usuários?
não especificado
driver livre utilizado:

Epson provides a free GPL driver for it https://www.openprinting.org/printer/Epson/Epson-ME_Office_510


[  618.803008] usb 1-2: new high-speed USB device number 5 using ehci-pci
[  618.834956] usb 1-2: New USB device found, idVendor=04b8, idProduct=084f, bcdDevice= 1.00
[  618.834959] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  618.834961] usb 1-2: Product: USB2.0 MFP(Hi-Speed)
[  618.834963] usb 1-2: Manufacturer: EPSON
[  618.834965] usb 1-2: SerialNumber: 4C41324B3032373591
[  618.843978] usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04B8 pid 0x084F
[  618.844721] usb-storage 1-2:1.2: USB Mass Storage device detected
[  618.846036] scsi host3: usb-storage 1-2:1.2
[  619.868906] scsi 3:0:0:0: Direct-Access     EPSON    Stylus Storage   1.00 PQ: 0 ANSI: 2
[  619.896165] sd 3:0:0:0: [sdf] Attached SCSI removable disk

hwinfo --printer

14: USB 00.1: 10900 Printer                                     
  [Created at usb.122]
  Unique ID: 3X50.kacIztomw9F
  Parent ID: k4bc.9T1GDCLyFd9
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.1
  SysFS BusID: 1-2:1.1
  Hardware Class: printer
  Model: "Epson ME OFFICE 510"
  Hotplug: USB
  Vendor: usb 0x04b8 "Epson"
  Device: usb 0x084f "ME OFFICE 510"
  Revision: "1.00"
  Serial ID: "4C41324B3032373591"
  Driver: "usblp"
  Driver Modules: "usblp"
  Speed: 480 Mbps
  Module Alias: "usb:v04B8p084Fd0100dc00dsc00dp00ic07isc01ip02in01"
  Driver Info #0:
    Driver Status: usblp is active
    Driver Activation Cmd: "modprobe usblp"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #15 (Hub)

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information