Home » Hardware » printers » Epson ME OFFICE 510
printer Epson ME OFFICE 510
model: Epson ME OFFICE 510(model id: 2142)
possible other names of the device:
ME OFFICE 510
vendor:
Seiko Epson Corp.
subtype (laser, inkjet, ..):
inkjet
VendorID:ProductID code of the device:
04b8:084f
year of commercialization:
not-specified
interface:
USB
tested on:
Parabola GNU/Linux
tested with the following kernel libre:
5.4.12-gnu-1
compatibility with free software:
A-Full
does it adopt any techniques to track users?
not-specified
free driver used:
usblp
Description:

Epson provides a free GPL driver for it https://www.openprinting.org/printer/Epson/Epson-ME_Office_510

dmesg

[  618.803008] usb 1-2: new high-speed USB device number 5 using ehci-pci
[  618.834956] usb 1-2: New USB device found, idVendor=04b8, idProduct=084f, bcdDevice= 1.00
[  618.834959] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  618.834961] usb 1-2: Product: USB2.0 MFP(Hi-Speed)
[  618.834963] usb 1-2: Manufacturer: EPSON
[  618.834965] usb 1-2: SerialNumber: 4C41324B3032373591
[  618.843978] usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04B8 pid 0x084F
[  618.844721] usb-storage 1-2:1.2: USB Mass Storage device detected
[  618.846036] scsi host3: usb-storage 1-2:1.2
[  619.868906] scsi 3:0:0:0: Direct-Access     EPSON    Stylus Storage   1.00 PQ: 0 ANSI: 2
[  619.896165] sd 3:0:0:0: [sdf] Attached SCSI removable disk

hwinfo --printer

14: USB 00.1: 10900 Printer                                     
  [Created at usb.122]
  Unique ID: 3X50.kacIztomw9F
  Parent ID: k4bc.9T1GDCLyFd9
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.1
  SysFS BusID: 1-2:1.1
  Hardware Class: printer
  Model: "Epson ME OFFICE 510"
  Hotplug: USB
  Vendor: usb 0x04b8 "Epson"
  Device: usb 0x084f "ME OFFICE 510"
  Revision: "1.00"
  Serial ID: "4C41324B3032373591"
  Driver: "usblp"
  Driver Modules: "usblp"
  Speed: 480 Mbps
  Module Alias: "usb:v04B8p084Fd0100dc00dsc00dp00ic07isc01ip02in01"
  Driver Info #0:
    Driver Status: usblp is active
    Driver Activation Cmd: "modprobe usblp"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #15 (Hub)

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information