Home » Hardware » cartes ethernet » NVIDIA Corporation MCP61 Ethernet (rev a2)
carte ethernet NVIDIA Corporation MCP61 Ethernet (rev a2)
modèle: NVIDIA Corporation MCP61 Ethernet (rev a2)(ID du modèle: 2105)
autres noms possibles du périphérique:
Gigabyte Technology Co., Ltd MCP61 Ethernet
vendeur:
NVIDIA Corporation
VendorID:ProductID du périphérique:
10de:03ef
année de commercialisation:
non-spécifié
interface:
non-spécifié
testé sur:
Parabola GNU/Linux
Debian GNU/Linux 10 buster
testé avec le kernel libre suivant:
5.2.2-gnu-1
4.19.0-9-amd64
cela fonctionne-t-il avec le logiciel libre ?
oui
pilote libre utilisé:
forcedeth
Description:

dmesg

[    1.770796] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    2.324526] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:4d:83:f2:3d
[    2.324529] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[   20.814573] forcedeth 0000:00:07.0 eth6: renamed from eth0

lspci -vvnnk

00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2)
	Subsystem: Gigabyte Technology Co., Ltd MCP61 Ethernet [1458:e000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 24
	NUMA node: 0
	Region 0: Memory at f5006000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at cc00 [size=8]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
		Address: 00000000fee01004  Data: 4025
		Masking: 000000fe  Pending: 00000000
	Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth
00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2)
	Subsystem: Gigabyte Technology Co., Ltd MCP61 Ethernet [1458:e000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 21
	NUMA node: 0
	Region 0: Memory at f5006000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at cc00 [size=8]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
		Address: 0000000000000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth

Write below your motivation

Le contenu de cette page est dans le Domaine Public (voir la page CC0 pour plus d'informations). Quiquonque est libre de copier, modifier, publier, utiliser, vendre ou distribuer le texte , quelques soit le but et le moyen.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information