Home » Hardware » ethernet cards » NVIDIA Corporation MCP61 Ethernet (rev a2)
ethernet card NVIDIA Corporation MCP61 Ethernet (rev a2)
model: NVIDIA Corporation MCP61 Ethernet (rev a2)(model id: 2105)
possible other names of the device:
Gigabyte Technology Co., Ltd MCP61 Ethernet
vendor:
NVIDIA Corporation
VendorID:ProductID code of the device:
10de:03ef
year of commercialization:
not-specified
interface:
not-specified
tested on:
Parabola GNU/Linux
Debian GNU/Linux 10 buster
tested with the following kernel libre:
5.2.2-gnu-1
4.19.0-9-amd64
does it work with free software?
yes
free driver used:
forcedeth
Description:

dmesg

[    1.770796] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    2.324526] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:4d:83:f2:3d
[    2.324529] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[   20.814573] forcedeth 0000:00:07.0 eth6: renamed from eth0

lspci -vvnnk

00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2)
	Subsystem: Gigabyte Technology Co., Ltd MCP61 Ethernet [1458:e000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 24
	NUMA node: 0
	Region 0: Memory at f5006000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at cc00 [size=8]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
		Address: 00000000fee01004  Data: 4025
		Masking: 000000fe  Pending: 00000000
	Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth
00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2)
	Subsystem: Gigabyte Technology Co., Ltd MCP61 Ethernet [1458:e000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 21
	NUMA node: 0
	Region 0: Memory at f5006000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at cc00 [size=8]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
		Address: 0000000000000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information