Realtek-Semiconductor-Corp.

0x818b

Maxxter mini-USB 300Mbps Wireless Device

0bda:818b

not-specified

USB

parabola , trisquel_8_0

3.14.51-gnu-1-lts

no

https://github.com/jpostma/rtl8192eu

Maxxter [h1]Devices[/h1]

[p]Maxxter is a Dutch company. Their Mini-USB device is a bit larger than "nano" (twice as big). After compiling the [a]https://github.com/jpostma/rtl8192eu | GPL driver[/a], installing it, the device was immediately recognized and ready to go. But [a]https://github.com/jpostma/rtl8192eu/blob/master/hal/OUTSRC/rtl8192e/HalHWImg8192E_FW_v18.c | the driver comes with a byte array[/a] for firmware "source". "source".[/p]

[h1]Detailed Information[/h1]

[b]lsusb[/b]
[code]lsusb
Bus 003 Device 002: ID 0bda:818b Realtek Semiconductor Corp. RTL8192EU 802.11b/g/n WLAN Adapter
[/code]

[b]sudo lsusb -v[/b]
[code]
Bus 003 Device 002: ID 0bda:818b Realtek Semiconductor Corp. RTL8192EU 802.11b/g/n WLAN Adapter
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bda Realtek Semiconductor Corp.
idProduct 0x818b RTL8192EU 802.11b/g/n WLAN Adapter
bcdDevice 2.00
iManufacturer 1 Realtek
iProduct 2 802.11n NIC
iSerial 3 00e04c000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 53
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 802.11n NIC
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 12
bNumDeviceCaps 1
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
Link Power Management (LPM) Supported
Device Status: 0x0001
Self Powered
[/code]

[b]hwinfo --usb[/b]
[code]
10: USB 00.0: 0000 Unclassified device
[Created at usb.122]
Unique ID: mZxt.4rr1rNr4G60
Parent ID: uIhY.2DFUsyrieMD
SysFS ID: /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0
SysFS BusID: 3-2:1.0
Hardware Class: unknown
Model: "Realtek 802.11n NIC"
Hotplug: USB
Vendor: usb 0x0bda "Realtek Semiconductor Corp."
Device: usb 0x818b "802.11n NIC"
Revision: "2.00"
Serial ID: "00e04c000001"
Speed: 480 Mbps
Module Alias: "usb:v0BDAp818Bd0200dc00dsc00dp00icFFiscFFipFFin00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #9 (Hub)
[/code]