Home » Hardware » schede video » NVIDIA Corporation C79 [GeForce 9200M G] (rev b1)
scheda video NVIDIA Corporation C79 [GeForce 9200M G] (rev b1)
modello: NVIDIA Corporation C79 [GeForce 9200M G] (rev b1)(id del modello: 821)
eventuali altri nomi del dispositivo:
Fujitsu Technology Solutions MCP79 [GeForce 8200M G]
ASUSTek C79 [GeForce 9200M G]
marca:
NVIDIA Corporation
codice VendorID:ProductID del prodotto:
10de:086f
anno di commercializzazione:
2008
interfaccia:
non specificato
testato con:
Parabola GNU/Linux
Trisquel 5.5 Brigantia
testato con il seguente kernel libre:
5.4.12-gnu-1
3.0.0-17-generic
come funziona con il software libero?
funziona con accelerazione 3D
driver liberi usati:
nouveau
Descrizione:

9200M

lspci -vmmnn

Slot:	02:00.0
Class:	VGA compatible controller [0300]
Vendor:	NVIDIA Corporation [10de]
Device:	C79 [GeForce 9200M G] [086f]
SVendor:	ASUSTeK Computer Inc. [1043]
SDevice:	Device [16b2]
Rev:	b1

lspci -nnk

02:00.0 VGA compatible controller [0300]: NVIDIA Corporation C79 [GeForce 9200M G] [10de:086f] (rev b1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:16b2]
	Kernel driver in use: nouveau
	Kernel modules: nouveau, nvidiafb

8200M

It works, both the framebuffer and X11 but as soon as an OpenGL call is made, it freezes the whole laptop completly. It looks like a hardware problem or a bug with the driver wrongly assuming it's a 9200M since it has the same vendor ID.

lspci -vvnnk

02:00.0 VGA compatible controller [0300]: NVIDIA Corporation MCP79 [GeForce 8200M G] [10de:086f] (rev b1) (prog-if 00 [VGA controller])
	Subsystem: Fujitsu Technology Solutions MCP79 [GeForce 8200M G] [1734:1151]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at cc000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M]
	Region 5: I/O ports at 4000 [size=128]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
		Address: 00000000fee01004  Data: 4028
	Kernel driver in use: nouveau
	Kernel modules: nouveau

hwinfo

16: PCI 200.0: 0300 VGA compatible controller (VGA)
  [Created at pci.386]
  Unique ID: B35A.A+EkLoYjeHC
  Parent ID: 37TO.rhOQxRJg2zB
  SysFS ID: /devices/pci0000:00/0000:00:10.0/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: graphics card
  Model: "nVidia MCP79 [GeForce 8200M G]"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x086f "MCP79 [GeForce 8200M G]"
  SubVendor: pci 0x1734 "Fujitsu Technology Solutions"
  SubDevice: pci 0x1151 
  Revision: 0xb1
  Driver: "nouveau"
  Driver Modules: "nouveau"
  Memory Range: 0xcc000000-0xccffffff (rw,non-prefetchable)
  Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
  Memory Range: 0xce000000-0xcfffffff (ro,non-prefetchable)
  I/O Ports: 0x4000-0x4fff (rw)
  Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
  IRQ: 29 (8330 events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v000010DEd0000086Fsv00001734sd00001151bc03sc00i00"
  Driver Info #0:
    Driver Status: nouveau is active
    Driver Activation Cmd: "modprobe nouveau"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #15 (PCI bridge)

dmesg

[   10.398098] PCI Interrupt Link [LGPU] enabled at IRQ 22
[   10.398214] nouveau 0000:02:00.0: NVIDIA MCP79/MCP7A (0ac780b1)
[   10.417305] nouveau 0000:02:00.0: bios: version 62.79.38.00.17
[   10.438209] nouveau 0000:02:00.0: fb: 128 MiB stolen system memory
[   10.515566] [TTM] Zone  kernel: Available graphics memory: 438278 KiB
[   10.515568] [TTM] Initializing pool allocator
[   10.515574] [TTM] Initializing DMA pool allocator
[   10.515593] nouveau 0000:02:00.0: DRM: VRAM: 128 MiB
[   10.515595] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
[   10.515600] nouveau 0000:02:00.0: DRM: TMDS table version 2.0
[   10.515602] nouveau 0000:02:00.0: DRM: DCB version 4.0
[   10.515605] nouveau 0000:02:00.0: DRM: DCB outp 00: 01020323 00010034
[   10.515607] nouveau 0000:02:00.0: DRM: DCB outp 01: 02001300 0000001e
[   10.515609] nouveau 0000:02:00.0: DRM: DCB outp 02: 02012332 00020010
[   10.515612] nouveau 0000:02:00.0: DRM: DCB conn 00: 00000040
[   10.515614] nouveau 0000:02:00.0: DRM: DCB conn 01: 00000100
[   10.515615] nouveau 0000:02:00.0: DRM: DCB conn 02: 00001261
[   10.518174] nouveau 0000:02:00.0: DRM: MM: using M2MF for buffer copies
[   10.518757] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   10.518758] [drm] Driver supports precise vblank timestamp query.
[   10.559432] nouveau 0000:02:00.0: DRM: allocated 1280x800 fb: 0x50000, bo 000000000c1bbc99
[   10.559613] fbcon: nouveaudrmfb (fb0) is primary device

Write below your motivation

I contenuti di questa pagina sono di Pubblico Dominio. (leggi la pagina CC0 per informazioni dettagliate). Chiunque è libero di copiare, modificare, pubblicare, usare, vendere, o distribuire tale contenuto per qualsiasi fine, commerciale o non commerciale, e con ogni mezzo.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information