Differenze tra la revisione del 15:10, 2 gennaio 2020, creata da parajh7, e la revisione del 18:41, 19 novembre 2019
Nota: il testo in rosso è stato cancellato dalla revisione precedente, il testo in verde è stato aggiunto in questa revisione e il testo in grigio non è stato cambiato
differenze nel campo: marca
C-Media-Electronics-Inc
differenze nel campo: nome del modello
C-Media CMI8330/C3D
differenze nel campo: eventuali altri nomi del dispositivo
CMI8330
CHX-B
differenze nel campo: codice VendorID:ProductID del prodotto
13f6:0001
differenze nel campo: anno di commercializzazione
1997 2002
differenze nel campo: interfaccia
ISA
differenze nel campo: distribuzione GNU/Linux usata per il test
parabola
differenze nel campo: testato con il seguente kernel libre
5.3.8-gnu-1 5.4.2-gnu-1
differenze nel campo: funziona con il software libero?
yes
differenze nel campo: driver liberi usati
snd-cmi8330
differenze nel campo: Descrizione
[p]Sound Blaster 16 clone. It [del]It doesn't work even after inserting the required module, it loads and apears to work but there is no sound output. The front plate doesn't have the jacks labeled so i'm not sure which is the speaker one, but one of them produces white noise when plugging. I tested even the CD-in and it still refuses to work. There are some errors on dmesg but I doubt there's a problem with the driver so most likely it's my card the faulty one.[/p] one.[/del][/p]
[p]It works now, not sure if the updated kernel or a setting made a difference. Like the rest of the ISA cards the module has to be modprobed
[code]modprobe snd-cmi8330[/code] is this case. Fabrication year from the sticker on the back of it shows 2002/9. [/p]

[p]hwinfo --verbose --sound[/p]
[code]23: ISA(PnP) 01.0: 0401 Multimedia audio controller
[Created at isapnp.142]
Unique ID: R_Yp.eYoMb3EKowF
SysFS ID: /devices/pnp1/01:01/01:01.00
SysFS BusID: 01:01.00
Hardware Class: sound
Model: "CMI8330. Audio Adapter"
Vendor: CMI
Device: eisa 0x0001 "CMI8330. Audio Adapter"
SubVendor: @@@
SubDevice: eisa 0x0001
Driver Info #0:
Driver Status: snd-cmi8330 is active
Driver Activation Cmd: "modprobe snd-cmi8330"
Config Status: cfg=new, avail=yes, need=no, active=unknown
[/code]
[p]dmesg[/p]
[code][ 559.010976] cmi8330 01:01.00: [io 0x0530-0x0537]
[ 559.011003] cmi8330 01:01.00: [io 0x0388-0x038f]
[ 559.011064] cmi8330 01:01.00: [io 0x0530-0x0537]
[ 559.011087] cmi8330 01:01.00: [io 0x0388-0x038f]
[ 559.011193] cmi8330 01:01.00: [irq 5]
[ 559.011213] cmi8330 01:01.00: [dma 1]
[ 559.013511] cmi8330 01:01.00: activated
[ 559.013539] cmi8330 01:01.03: [io 0x0220-0x022f]
[ 559.013673] cmi8330 01:01.03: [irq 10]
[ 559.013693] cmi8330 01:01.03: [dma 3]
[ 559.013709] cmi8330 01:01.03: [dma 5]
[ 559.019054] cmi8330 01:01.03: activated
[ 559.019100] cmi8330 01:01.01: [io 0x0330-0x0331]
[ 559.019146] cmi8330 01:01.01: [io 0x0300-0x0301]
[ 559.019344] cmi8330 01:01.01: unable to assign resources
[ 559.019358] SA sound/isa/cmi8330.c:378 MPU-401 PnP configure failure: will be disabled
[ 559.027470] SA sound/isa/wss/wss_lib.c:447 mce_down - exit = 0xb
[ 559.037518] SA sound/isa/wss/wss_lib.c:447 mce_down - exit = 0xb
[ 559.047509] SA sound/isa/wss/wss_lib.c:447 mce_down - exit = 0xb
[ 559.057508] SA sound/isa/wss/wss_lib.c:447 mce_down - exit = 0xb
[ 559.067510] SA sound/isa/wss/wss_lib.c:447 mce_down - exit = 0xb[/code]
I contenuti di questa pagina sono di Pubblico Dominio. (leggi la pagina CC0 per informazioni dettagliate). Chiunque è libero di copiare, modificare, pubblicare, usare, vendere, o distribuire tale contenuto per qualsiasi fine, commerciale o non commerciale, e con ogni mezzo.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information