Home » Hardware » Εκτυπωτές » Canon, Inc.
Εκτυπωτές Canon, Inc.
Μοντέλο: Canon, Inc.(Κωδικός id του μοντέλου: 2023)
Άλλα πιθανά ονόματα της συσκευής:
Canon PIXMA iP2820
Κατασκευαστής:
Canon, Inc.
Υποτύπος (laser, inkjet, ..):
ψεκασμού μελάνης
Κωδικός Κατασκευαστή:Κωδικός Προϊόντος:
04a9:10e4
Έτος εμπορικής κυκλοφορίας:
2015
Διεπαφή:
USB
Δοκιμάσθηκε με:
Trisquel 8.0 Flidas
Δοκιμάσθηκε με τον εξής ελεύθερο πυρήνα:
4.4.0-119-generic
Συμβατότητα με το ελεύθερο λογισμικό:
B-Μερικός
Υιοθετεί οποιεσδήποτε τεχνικές για παρακολούθηση των χρηστών;
όχι
Ελεύθεροι οδηγοί/driver που χρησιμοποιήθηκαν:
CUPS 2.1.3-4ubuntu0.4 + Gutenprint 5.2.11
Περιγραφή:

Experiment support for the Canon PIXMA iP2820 was added in version 5.2.11 of Gutenprint. This version of Gutenprint first appeared in Debian 9 Stretch and Trisquel 8 Flidas.

Why only a 'B-Partial' rating:
  • Anything below ~16mm from the bottom of a Letter size page gets consistently cut off in my tests. I can print as close as 4mm to the left and right sides of the page and as close as ~3.5mm to the top of the page.
  • Ink level reporting does not work.
  • This model is only experimentally supported by Gutenprint.

According to the printer test page the PPD file in use is STP00079.PPD.

# lsusb -v
Bus 002 Device 005: ID 04a9:10e4 Canon, Inc. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x04a9 Canon, Inc.
  idProduct          0x10e4 
  bcdDevice            1.01
  iManufacturer           1 Canon
  iProduct                2 iP2800 series
  iSerial                 3 D3F190
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         7 Printer
      bInterfaceSubClass      1 Printer
      bInterfaceProtocol      2 Bidirectional
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered
# hwinfo --usb
05: USB 00.0: 10900 Printer
  [Created at usb.122]
  Unique ID: JPTW.WhDyV5klE05
  Parent ID: FKGF.0j9+vWlqL56
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0
  SysFS BusID: 2-1.3:1.0
  Hardware Class: printer
  Model: "Canon iP2800 series"
  Hotplug: USB
  Vendor: usb 0x04a9 "Canon"
  Device: usb 0x10e4 "iP2800 series"
  Revision: "1.01"
  Serial ID: "D3F190"
  Driver: "usblp"
  Driver Modules: "usblp"
  Speed: 480 Mbps
  Module Alias: "usb:v04A9p10E4d0101dc00dsc00dp00ic07isc01ip02in00"
  Driver Info #0:
    Driver Status: usblp is active
    Driver Activation Cmd: "modprobe usblp"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #11 (Hub)

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information