Home » Hardware » notebooks » Eee PC 1001PX » Histórico » Diferenças
Diferenças entre a versão de 14:27, 23 Agosto 2011, criada por aloniv, e a versão de 14:23, 23 Agosto 2011
Aviso: o texto em vermelho foi excluído da versão anterior, o texto em verde foi adicionado nesta versão e o texto em cinza não foi alterado.
diferenças no campo: fabricante
Asus
diferenças no campo: nome do modelo
EeePC 1001PX
diferenças no campo: subtype (notebook or netbook)
netbook
diferenças no campo: arquitetura
amd64
diferenças no campo: does it have a free bios?
no
diferenças no campo: É possível instalar sistemas operacionais livres?
not-specified
diferenças no campo: does the device prevent the installation of wifi cards not-approved by the vendor?
not-specified
diferenças no campo: ano de comercialização
2010
diferenças no campo: distribuição GNU/Linux usada para teste
trisquel_4_0
diferenças no campo: compatibilidade com software livre
A-platinum
diferenças no campo: testado com o seguinte kernel livre
2.6.32-30-generic 2.6.32-33-generic
diferenças no campo: modelo da placa de vídeo
Intel Corporation N10 Family Integrated Graphics Controller [8086:a011]
diferenças no campo: a placa de vídeo funciona?
yes_with_3D
diferenças no campo: modelo da placa wifi
Atheros Communications Inc. AR2427 Wireless Network Adapter (PCI-Express) [168c:002c] (rev 01)
diferenças no campo: a placa wifi funciona?
yes
diferenças no campo: modelo da webcam
13d3:5702 IMC Networks
diferenças no campo: A webcam funciona?
yes
diferenças no campo: Descrição
[p]In order to get wireless connectivity and in order to hear audio from the audio jack on Trisquel 4.0 one needs to install updates (which include a newer kernel) and to enable wireless connectivity in the BIOS.[/p]
[p]To get the internal microphone working I upgraded the alsa-driver code as mentioned here:
[code]https://wiki.ubuntu.com/Audio/InstallingLinuxAlsaDriverModules[/code]
This is what needs to be done:
[code]sudo add-apt-repository ppa:ubuntu-audio-dev/ppa
sudo aptitude update
sudo aptitude install linux-alsa-driver-modules-$(uname -r)[/code]
Then restart the computer and in gnome-alsamixer (if you don't have it install it via apt-get) set mic boost to 0%, capture to 90% and remaining controls to 100%. [/p]
[p]To get FN keys type this command in the terminal:
[code]sudo gedit /etc/default/grub[/code]
and replace
[code]GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"[/code]
by
[code]GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux"[/code]
Ubuntu's help page recommends replacing the line by the one below for better power management
[code]GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor"[/code]
as you can see here:
[code]https://help.ubuntu.com/community/EeePC/Fixes[/code]
Then type in the terminal
[code]sudo update-grub[/code][/p]
[p]To disable the clicking sound when battery is used just type this in the terminal:
[code]sudo hdparm -B 254 /dev/sda[/code][/p]
In order to save this setting add the following lines to /etc/hdparm.conf:
[code]/dev/sda {
apm_battery = 254
}[/code]
[p]Note also that this netbook can be purchased without Windows preinstalled.[/p]
[p]Here are the outputs:[/p]
[p]lsusb
[code]Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 13d3:5702 IMC Networks
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub[/code]

lspci -nnk
[code]00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011]
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012]
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02)
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
Kernel modules: i2c-i801
01:00.0 Ethernet controller [0200]: Atheros Communications AR8132 Fast Ethernet [1969:1062] (rev c0)
Kernel driver in use: atl1c
Kernel modules: atl1c
02:00.0 Network controller [0280]: Atheros Communications Inc. AR2427 Wireless Network Adapter (PCI-Express) [168c:002c] (rev 01)
Kernel driver in use: ath9k
Kernel modules: ath9k[/code][/p]
The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information