SCSI 700.1: 10600 Disk
  [Created at block.254]
  UDI: /org/freedesktop/Hal/devices/storage_serial_Kingston_Reader_MicSD_M2_AA00000000214570_0_1
  Unique ID: i0+h.DrXUruEJOp2
  Parent ID: 5YuN.dRJvf4p1ln1
  SysFS ID: /class/block/sdf
  SysFS BusID: 7:0:0:1
  SysFS Device Link: /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/host7/target7:0:0/7:0:0:1
  Hardware Class: disk
  Model: "Kingston Reader  MicSD/M2"
  Vendor: usb 0x090c "Kingston"
  Device: usb 0x6300 "Reader  MicSD/M2"
  Revision: "0200"
  Driver: "usb-storage", "sd"
  Driver Modules: "usb_storage"
  Device File: /dev/sdf (/dev/sg6)
  Device Files: /dev/sdf, /dev/disk/by-id/usb-Kingston_Reader_MicSD_M2_AA00000000214570-0:1, /dev/disk/by-path/pci-0000:00:1d.7-usb-0:8:1.0-scsi-0:0:0:1
  Device Number: block 8:80-8:95 (char 21:6)
  Drive status: no medium
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #20 (USB Controller)

Bus 001 Device 009: ID 090c:6300 Feiya Technology Corp. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x090c Feiya Technology Corp.

The name printed on the device is Kingston MobileLite G2; are we using the correct labeling model for h-node?

Seems to me that hwinfo is more accurate on the device info that lsusb.