Home » Hardware » contrôleurs hôte » JMicron Technology Corp. IEEE 1394 Host Controller (rev 30)
contrôleur hôte JMicron Technology Corp. IEEE 1394 Host Controller (rev 30)
modèle: JMicron Technology Corp. IEEE 1394 Host Controller (rev 30)(ID du modèle: 1227)
autres noms possibles du périphérique:
JMicron Technology Corp. IEEE 1394 Host Controller (rev 10)
Micro-Star International Co., Ltd. [MSI] IEEE 1394 Host Controller
vendeur:
JMicron Technology Corp.
sous-type (PCMCIA, USB, Firewire, HECI):
Contrôleur Firewire
VendorID:ProductID du périphérique:
197b:2380
année de commercialisation:
non-spécifié
interface:
Firewire
testé sur:
Parabola GNU/Linux
Trisquel 6.0 Toutatis
testé avec le kernel libre suivant:
5.2.4-gnu-1
3.2.0-38-generic
cela fonctionne-t-il avec le logiciel libre ?
oui
pilote libre utilisé:
firewire_ohci
Description:

lspci -vnnmm

Slot: 24:00.0
Class: FireWire (IEEE 1394) [0c00]
Vendor: JMicron Technology Corp. [197b]
Device: IEEE 1394 Host Controller [2380]
SVendor: Hewlett-Packard Company [103c]
SDevice: Device [179b]
Rev: 30
ProgIf: 10

lspci -nnk

24:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] (rev 30)
Subsystem: Hewlett-Packard Company Device [103c:179b]
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci

lspci -vvnnk

07:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] (rev 10) (prog-if 10 [OHCI]
)
        Subsystem: Micro-Star International Co., Ltd. [MSI] IEEE 1394 Host Controller [1462:522d]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at fbeff800 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at fbeff400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME+
        Capabilities: [80] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: fffffffc  Data: 0000
        Kernel driver in use: firewire_ohci
        Kernel modules: firewire_ohci

Write below your motivation

Le contenu de cette page est dans le Domaine Public (voir la page CC0 pour plus d'informations). Quiquonque est libre de copier, modifier, publier, utiliser, vendre ou distribuer le texte , quelques soit le but et le moyen.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information