Home » Hardware » host controllers » JMicron Technology Corp. IEEE 1394 Host Controller (rev 30)
host controller JMicron Technology Corp. IEEE 1394 Host Controller (rev 30)
modelo: JMicron Technology Corp. IEEE 1394 Host Controller (rev 30)(id del modelo: 1227)
otros posibles nombres del dispositivo:
JMicron Technology Corp. IEEE 1394 Host Controller (rev 10)
Micro-Star International Co., Ltd. [MSI] IEEE 1394 Host Controller
fabricante:
JMicron Technology Corp.
subtipo (PCMCIA, USB, Firewire, HECI):
Controlador Firewire
código VendorID:ProductID del dispositivo:
197b:2380
año de comercialización:
no especificado
interfaz:
Firewire
probado con:
Parabola GNU/Linux
Trisquel 6.0 Toutatis
probado con el siguiente kernel libre:
5.2.4-gnu-1
3.2.0-38-generic
¿funciona con software libre?
si
driver libre usado:
firewire_ohci
Descripción:

lspci -vnnmm

Slot: 24:00.0
Class: FireWire (IEEE 1394) [0c00]
Vendor: JMicron Technology Corp. [197b]
Device: IEEE 1394 Host Controller [2380]
SVendor: Hewlett-Packard Company [103c]
SDevice: Device [179b]
Rev: 30
ProgIf: 10

lspci -nnk

24:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] (rev 30)
Subsystem: Hewlett-Packard Company Device [103c:179b]
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci

lspci -vvnnk

07:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] (rev 10) (prog-if 10 [OHCI]
)
        Subsystem: Micro-Star International Co., Ltd. [MSI] IEEE 1394 Host Controller [1462:522d]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at fbeff800 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at fbeff400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME+
        Capabilities: [80] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: fffffffc  Data: 0000
        Kernel driver in use: firewire_ohci
        Kernel modules: firewire_ohci

Write below your motivation

El contenido de esta página está en Dominio Público. (vea la página CC0 para información detallada). Cualquiera es libre de copiar, modificar, publicar, usar, vender o distribuir el texto para cualquier propósito, comercial o no comercial, y por cualquier medio.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information