Home » Hardware » host controllers » JMicron Technology Corp. IEEE 1394 Host Controller (rev 30)
host controller JMicron Technology Corp. IEEE 1394 Host Controller (rev 30)
Modell: JMicron Technology Corp. IEEE 1394 Host Controller (rev 30)(Modell-ID: 1227)
Andere mögliche Gerätenamen:
JMicron Technology Corp. IEEE 1394 Host Controller (rev 10)
Micro-Star International Co., Ltd. [MSI] IEEE 1394 Host Controller
Hersteller:
JMicron Technology Corp.
Typ (PCMCIA, USB, Firewire, HECI):
Firewire Controller
Hersteller-ID:Produkt-ID des Gerätes:
197b:2380
Jahr der Markteinführung:
not-specified
Schnittstelle:
Firewire
überprüft mit Distribution:
Parabola GNU/Linux
Trisquel 6.0 Toutatis
Überbrüft mit folgendem freien Betriebssystemkern (Libre Kernel):
5.2.4-gnu-1
3.2.0-38-generic
Funktioniert mit Freie Software?
Ja
Verwendete Freie Firmware/Treiber:
firewire_ohci
Beschreibung:

lspci -vnnmm

Slot: 24:00.0
Class: FireWire (IEEE 1394) [0c00]
Vendor: JMicron Technology Corp. [197b]
Device: IEEE 1394 Host Controller [2380]
SVendor: Hewlett-Packard Company [103c]
SDevice: Device [179b]
Rev: 30
ProgIf: 10

lspci -nnk

24:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] (rev 30)
Subsystem: Hewlett-Packard Company Device [103c:179b]
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci

lspci -vvnnk

07:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] (rev 10) (prog-if 10 [OHCI]
)
        Subsystem: Micro-Star International Co., Ltd. [MSI] IEEE 1394 Host Controller [1462:522d]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at fbeff800 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at fbeff400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME+
        Capabilities: [80] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: fffffffc  Data: 0000
        Kernel driver in use: firewire_ohci
        Kernel modules: firewire_ohci

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information