Aviso: o texto em vermelho foi excluído da versão anterior, o texto em verde foi adicionado nesta versão e o texto em cinza não foi alterado.
diferenças no campo: fabricante
MosChip-Semiconductor-Technology-Ltd.
diferenças no campo: nome do modelo
PCI 9815 Multi-I/O Controller
diferenças no campo: outros possíveis nomes do dispositivo
MCS9805
MCS9815
MCS9820
MCS9835
MCS9845
LSI Logic / Symbios Logic 2P0S (2 port parallel adaptor)
diferenças no campo: subtipo (laser, inkjet, ..)
pcmcia-controller
diferenças no campo: código VendorID:ProductID do dispositivo
9710:9815
diferenças no campo: ano de comercialização
not-specified
diferenças no campo: interface
PCI
diferenças no campo: distribuição GNU/Linux usada para teste
debian
diferenças no campo: testado com o seguinte kernel livre
4.19.0-arch1-1-ARCH
diferenças no campo: funciona com software livre?
yes
diferenças no campo: driver livre utilizado
parport_pc
diferenças no campo: Descrição
MCS9805, MCS9815, MCS9820, MCS9835 and MCS9845 PCI Serial / Parallel ports on Linux platform.
[p]
The parport_pc driver does not always load properly and specific options must be passed using modprobe in order for the card to work properly. See the following PDF for more detailed instructions instructions: [a]http://www.asix.com.tw/FrootAttach/driver/MCS98xx_Linux_Driver_Installation_Guide_v100.pdf[/a]
[/p]
[p]
[a]www.drivers-download.com/Drv/MosChip/MCS98xx/MCS98xx_Linux.pdf[/a]
[a]http://www.asix.com.tw/FrootAttach/driver/MCS98xx_Linux_Driver_Installation_Guide_v100.pdf[/a]
For example, in order A file can be created inside /etc/modprobe.d to get the LSI Logic / set parport_pc options at each boot. My Symbios Logic 2P0S (2 port parallel adaptor) I had to first run
lspci -v
04:04.0 Communication controller: MosChip Semiconductor Technology Ltd. PCI 9815 Multi-I/O Controller (rev 01)
Subsystem: LSI Logic / Symbios Logic 2P0S (2 port parallel adaptor)
Flags: medium devsel, IRQ 7
I/O ports at c050 [size=8]
I/O ports at c040 [size=8]
I/O ports at c030 [size=8]
I/O ports at c020 [size=8]
I/O ports at c010 [size=8]
I/O ports at c000 [size=16]
Kernel modules: parport_pc
I then had to create takes the following file: /etc/modprobe.d/01-MCS98xx.conf
#
# Special settings for the MCS98xx parallel driver options to work correctly on my machine:
# [/p]
########################################################################### [p]
Note: My card has 2 parallel connectors, so I had to reference both I/O port addresses for both ports to function.
The contents of this page are in the Public Domain. (see the
CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
