Différences entre les révisions de 11:21, 11 Juillet 2017, créé par DavidHedlund, et la révision de 11:16, 11 Juillet 2017
Note : le texte en rouge a été supprimé de la version précédente, le texte en vert a été ajouté à cette version et le texte en gris n'a pas été changé.
differences dans l'entrée: vendeur
Linux-Foundation
differences dans l'entrée: nom de modèle
Linux Foundation 3.0 root hub
differences dans l'entrée: autres noms possibles du périphérique
differences dans l'entrée: sous-type (laser, inkjet, ..)
usb-controller
differences dans l'entrée: VendorID:ProductID du périphérique
1d6b:0003
differences dans l'entrée: année de commercialisation
not-specified
differences dans l'entrée: interface
USB
differences dans l'entrée: Distribution GNU/Linux utilisée pour le test
trisquel_7_0
differences dans l'entrée: testé avec le kernel libre suivant
Linux-libre 3.13.0-121-lowlatency
differences dans l'entrée: cela fonctionne-t-il avec le logiciel libre ?
yes
differences dans l'entrée: pilote libre utilisé
xhci_hcd
differences dans l'entrée: Description
[p]Hundreds of hardware devices are using [b]Linux Foundation 3.0 root hub[/b]. We need to list at least one hardware here to demonstrate which driver that is used. I confirm that I can use USB 3.0 speed on this hardware device too.[/p]

[h1]Gigabyte GA-Z270-Gaming K3 (rev. 1.0)[/h1]
I just list one of the USB 3.0 devices and its connected USB controller here to make the list short and concise.

[h2]USB device[/h2]

lsusb
[code]
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
[/code]

sudo lsusb -vd 1d6b 1d6b:
[code]
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x1d6b Linux Foundation
idProduct 0x0003 3.0 root hub
bcdDevice 3.13
iManufacturer 3 Linux 3.13.0-121-lowlatency xhci_hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:03:00.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 31
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
bMaxBurst 0
Hub Descriptor:
bLength 12
bDescriptorType 42
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
bHubDecLat 0.0 micro seconds
wHubDelay 0 nano seconds
DeviceRemovable 0x00
Hub Port Status:
Port 1: 0000.02a0 5Gbps power Rx.Detect
Port 2: 0000.02a0 5Gbps power Rx.Detect
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 15
bNumDeviceCaps 1
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x0008
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 3
Lowest fully-functional device speed is SuperSpeed (5Gbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 512 micro seconds
Device Status: 0x0001
Self Powered
[/code]

[h2]USB controller[/h2]
lspci
[code]
00:14.0 USB controller: Intel Corporation Device a2af
[/code]

sudo lspci -nnk
[code]
00:14.0 USB controller [0c03]: Intel Corporation Device [8086:a2af]
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5007]
Kernel driver in use: xhci_hcd
[/code]

cat /sys/bus/pci/devices/0000\:00\:14.0/usb2/idVendor
[code]
1d6b
[/code]

cat /sys/bus/pci/devices/0000\:00\:14.0/usb2/idProduct
[code]
0003
[/code]

[h1]References[/h1]
[list]
[*][a]https://certification.ubuntu.com/catalog/component/usb/4034/1d6b%3A0003/ | Linux Foundation 3.0 root hub[/a][/*]
[/list]
Le contenu de cette page est dans le Domaine Public (voir la page CC0 pour plus d'informations). Quiquonque est libre de copier, modifier, publier, utiliser, vendre ou distribuer le texte , quelques soit le but et le moyen.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information