No kernel module, it doesn't do anything.
lspci -vvnnk
03:02.0 Token ring network controller [0201]: IBM 16/4 Token ring UTP/STP controller [1014:003e] (rev 04) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at e800 [size=256] Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256] Region 2: Memory at febff000 (32-bit, non-prefetchable) [size=2K] Expansion ROM at febe0000 [disabled] [size=16K]
hwinfo --netcard
14: PCI 302.0: 0201 Token ring network controller [Created at pci.386] Unique ID: 08OF.B6VNM8XXLs5 Parent ID: 6NW+.RlqjBL7v2IB SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:02.0 SysFS BusID: 0000:03:02.0 Hardware Class: network Model: "IBM 16/4 Token ring UTP/STP controller" Vendor: pci 0x1014 "IBM" Device: pci 0x003e "16/4 Token ring UTP/STP controller" Revision: 0x04 I/O Ports: 0xe800-0xe8ff (rw) Memory Range: 0xfebffc00-0xfebffcff (rw,non-prefetchable) Memory Range: 0xfebff000-0xfebff7ff (rw,non-prefetchable) Memory Range: 0xfebe0000-0xfebe3fff (ro,non-prefetchable,disabled) IRQ: 15 (no events) Module Alias: "pci:v00001014d0000003Esv00000000sd00000000bc02sc01i00" Driver Info #0: Driver Status: olympic is not active Driver Activation Cmd: "modprobe olympic" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #15 (PCI bridge)
Dispositivos 3G | 33 |
Acquisition cards | 34 |
Bluetooth | 56 |
Placas de rede | 170 |
Leitores de impressão digital | 11 |
Controladores de host | 170 |
Modems | 18 |
Notebook | 786 |
Printers | 125 |
Adaptadores RAID | 20 |
Scanners | 24 |
Leitores de cartão SD | 56 |
Placas de som | 140 |
Placas de vídeo | 341 |
Webcams | 132 |
Placas wifi | 230 |
TOTAL | 2346 |