It is a USB3 1Gbit/s adapter. I tested it at 1Gbit/s speed - works fine for long periods (several hours).
lsusb:Bus 002 Device 010: ID 2001:4a00 D-Link Corp. D-Link DUB-1312usb-devices:
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ff(vend.) Sub=ff Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=4a00 Rev=01.00 S: Manufacturer=D-Link Elec. Corp. S: Product=D-Link DUB-1312 S: SerialNumber=************** C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=248mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=ax88179_178aethtool:
Settings for enp0s29f7u2: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: Symmetric Receive-only Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 3 Transceiver: internal Auto-negotiation: on Supports Wake-on: pg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes
Schede 3G | 34 |
Acquisition cards | 34 |
Bluetooth | 57 |
Schede ethernet | 172 |
Lettori di impronte digitali | 11 |
Host Controller | 170 |
Modems | 18 |
Notebook | 793 |
Printers | 126 |
Adattatori RAID | 20 |
Scanner | 24 |
Lettori di schede SD | 57 |
Schede audio | 142 |
Schede video | 343 |
Webcam | 132 |
Schede wifi | 234 |
TOTAL | 2367 |