[h1]Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)[/h1]
[p]The [b]STLab N-313[/b] PCI-e NIC have [b]RTL8111/8168/8411[/b] chipsets and works with Trisquel 7 by default.[/p]
[p]lspci[/p]
[code]0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)[/code]
[p]lspci -vmmnn[/p]
[code]
Slot: 0a:00.0
Class: Ethernet controller [0200]
Vendor: Realtek Semiconductor Co., Ltd. [10ec]
Device: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [8168]
SVendor: Realtek Semiconductor Co., Ltd. [10ec]
SDevice: RTL8111/8168 PCI Express Gigabit Ethernet controller [8168]
Rev: 06
[/code]
[p]sudo ethtool eth0[/p]
[code]
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Link partner advertised pause frame use: Symmetric Receive-only
Link partner advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000033 (51)
drv probe ifdown ifup
Link detected: yes
[/code]
[h1]Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)[/h1]
[p]lspci -vmmnn[/p]
[code]
Slot: 05:00.0
Class: Ethernet controller [0200]
Vendor: Realtek Semiconductor Co., Ltd. [10ec]
Device: RTL8111/8168B PCI Express Gigabit Ethernet controller [8168]
SVendor: Fujitsu Limited. [10cf]
SDevice: Device [16af]
Rev: 06
[/code]
[p]lspci -nnk[/p]
[code]
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: Fujitsu Limited. Device [10cf:16af]
Kernel driver in use: r8169
Kernel modules: r8169
[/code]
[p]lspci -nnpk[/p]
[code]04:00.1 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 12)[/code]
[p]lspci -v[/p]
[code]07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
Subsystem: Dell Device 0273
Flags: bus master, fast devsel, latency 0, IRQ 46
I/O ports at 6000 [size=256]
Memory at f8410000 (64-bit, prefetchable) [size=4K]
Memory at f8400000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at f8420000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: r8169
Kernel modules: r8169[/code]
[p]Revision 07 works.[/p]
[p]Revision 06 works.[/p]
[p]Revision 03 works.[/p]
[p]Revision 02 works.[/p]
[p]Revision 01 works.[/p]
[p]Revision 0a works.[/p]
[p]Added by rsandu, August 25th, 2011[/p]
[p]This card (same VendorID, rev. 01, integrated on a Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]) works very badly when coupled in the same system with a separate D-Link System Inc DGE-528T Gigabit Ethernet Adapter [1186:4300] (rev 10).[/p]
[p]The Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 0b) is included in the [b]Acer Z5771[/b] computer.[/p]
[p]According to manufacturer, revision 12, that is integrated in the [b]ASUS F550JK-DCM1120[/b] netbook, is [b]8168C[/b], not 8168B[/p]
[h3]Flow Control[/h3]
[p]As for kernel 3.11.0-18-generic Flow Control [b]can't[/b] be disable on this NIC[/p]
On Acer Aspire F 15 (in Debian 8.6.0, it needs rtl_nic/rtl8411-2.fw non-free firmware to work):
[b][root@localhost ~]# lspci -vmmnn -d 10ec:8168[/b]
[code]Slot: 04:00.1
Class: Ethernet controller [0200]
Vendor: Realtek Semiconductor Co., Ltd. [10ec]
Device: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [8168]
SVendor: Acer Incorporated [ALI] [1025]
SDevice: Device [108f]
Rev: 12
[/code]
[p]December 2019 test with latest Parabola kernel. Has none of the problems mentioned above [/p]
[p]lspci -vvnnk[/p]
[code]06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [
10ec:8168] (rev 02)
Subsystem: Micro-Star International Co., Ltd. [MSI] X58 Pro-E [1462:7522]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fbdff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f8ff0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fbdc0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Not readable
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169
[/code]
