Marvell-Technology-Group-Ltd.

Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)

ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus)

11ab:4320

not-specified 2003

not-specified

parabola, trisquel_5_5

5.5.13-gnu-1, 3.0.0-17-generic

yes

skge skge, sk98lin

[p]Hwinfo shows that sk98lin (which is missing from linux-libre) has an use for this ethernet device, but works perfectly without it anyway.[/p]
[p]lspci -vmmnn[/p]
[code]
Slot: 02:15.0
Class: Ethernet controller [0200]
Vendor: Marvell Technology Group Ltd. [11ab]
Device: 88E8001 Gigabit Ethernet Controller [4320]
SVendor: Acer Incorporated [ALI] [1025]
SDevice: Device [0085]
Rev: 13
[/code]

[p]lspci -nnk[/p]
[code]
02:15.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: Acer Incorporated [ALI] Device [1025:0085]
Kernel driver in use: skge
Kernel modules: skge
[/code]

lspci -v
[code]05:0c.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus)
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
Memory at d4014000 (32-bit, non-prefetchable) [size=16K]
I/O ports at a400 [size=256]
Expansion ROM at 40000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Kernel driver in use: skge
[/code]
[p]lspci -vvnnk[/p]
[code]02:05.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at feafc000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at d800 [size=256]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=7 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
Read-only fields:
[PN] Part number: Yukon 88E8001
[EC] Engineering changes: Rev. 1.3
[MN] Manufacture ID: Marvell
[SN] Serial number: AbCdEfG334454
[CP] Extended capability: 01 10 cc 03
[RV] Reserved: checksum good, 10 byte(s) reserved
Read/write fields:
[RW] Read-write area: 121 byte(s) free
End
Kernel driver in use: skge
Kernel modules: skge[/code]
[p]hwinfo[/p]
[code]20: PCI 205.0: 0200 Ethernet controller
[Created at pci.386]
Unique ID: uy4f.ku_pZL9tQC3
Parent ID: 6NW+.c7JTK_YUBi2
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:05.0
SysFS BusID: 0000:02:05.0
Hardware Class: network
Model: "ASUSTeK Marvell 88E8001 Gigabit Ethernet Controller (Asus)"
Vendor: pci 0x11ab "Marvell Technology Group Ltd."
Device: pci 0x4320 "88E8001 Gigabit Ethernet Controller"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x811a "Marvell 88E8001 Gigabit Ethernet Controller (Asus)"
Revision: 0x13
Driver: "skge"
Driver Modules: "skge"
Device File: enp2s5
Memory Range: 0xfeafc000-0xfeafffff (rw,non-prefetchable)
I/O Ports: 0xd800-0xd8ff (rw)
Memory Range: 0xfeac0000-0xfeadffff (ro,non-prefetchable,disabled)
IRQ: 22 (no events)
HW Address: 00:11:2f:09:e8:29
Permanent HW Address: 00:11:2f:09:e8:29
Link detected: no
Module Alias: "pci:v000011ABd00004320sv00001043sd0000811Abc02sc00i00"
Driver Info #0:
Driver Status: sk98lin is not active
Driver Activation Cmd: "modprobe sk98lin"
Driver Info #1:
Driver Status: skge is active
Driver Activation Cmd: "modprobe skge"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)[/code]