Differenze tra la revisione del 07:19, 14 gennaio 2020, creata da parajh7, e la revisione del 09:06, 30 ottobre 2012
Nota: il testo in rosso è stato cancellato dalla revisione precedente, il testo in verde è stato aggiunto in questa revisione e il testo in grigio non è stato cambiato
differenze nel campo: marca
Broadcom-Corporation
differenze nel campo: nome del modello
Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02)
differenze nel campo: eventuali altri nomi del dispositivo
Dell NetXtreme BCM5755M Gigabit Ethernet PCI Express
differenze nel campo: codice VendorID:ProductID del prodotto
14e4:1673
differenze nel campo: anno di commercializzazione
not-specified 2007
differenze nel campo: interfaccia
not-specified
differenze nel campo: distribuzione GNU/Linux usata per il test
parabola, trisquel_4_5 , trisquel_5_5
differenze nel campo: testato con il seguente kernel libre
5.4.2-gnu-1, 2.6.35-28-generic, 3.0.0-17-generic
differenze nel campo: funziona con il software libero?
yes
differenze nel campo: driver liberi usati
tg3
differenze nel campo: Descrizione
[p]The tg3 module is absent in the libre kernel due to certain models requiring proprietary blobs, so in distros like Parabola it is not working without recompiling the kernel. See [a]https://h-node.org/ethernetcards/view/en/415/Broadcom-Corporation-NetXtreme-BCM5782-Gigabit-Ethernet/2/1/Broadcom-Corporation/undef/undef/undef/ethernet-works/undef [/a]for more info[/p]
[p]lspci -vmmnn[/p]
[code]
Slot: 09:00.0
Class: Ethernet controller [0200]
Vendor: Broadcom Corporation [14e4]
Device: NetXtreme BCM5755M Gigabit Ethernet PCI Express [1673]
SVendor: Dell [1028]
SDevice: Device [01f9]
Rev: 02
[/code]

[p]lspci -nnk[/p]
[code]
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express [14e4:1673] (rev 02)
Subsystem: Dell Device [1028:01f9]
Kernel driver in use: tg3
Kernel modules: tg3
[/code]
[p]lspci -vvnnk[/p]
[code]09:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5755M Gigabit Ethernet PCI Express [14e4:1673] (rev 02)
Subsystem: Dell NetXtreme BCM5755M Gigabit Ethernet PCI Express [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe7f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
Read-only fields:
[PN] Part number: BCM95755m
[EC] Engineering changes: 01f9.004
[SN] Serial number: 0123456789
[MN] Manufacture ID: 14e4
[RV] Reserved: checksum good, 28 byte(s) reserved
Read/write fields:
[YA] Asset tag: XYZ01234567
[RW] Read-write area: 107 byte(s) free
End
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 50236c306080bf94 Data: bf36
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 6.500W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-1c-23-ff-fe-1e-18-00
Capabilities: [16c v1] Power Budgeting <?>[/code]
I contenuti di questa pagina sono di Pubblico Dominio. (leggi la pagina CC0 per informazioni dettagliate). Chiunque è libero di copiare, modificare, pubblicare, usare, vendere, o distribuire tale contenuto per qualsiasi fine, commerciale o non commerciale, e con ogni mezzo.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information