Nota: il testo in rosso è stato cancellato dalla revisione precedente, il testo in verde è stato aggiunto in questa revisione e il testo in grigio non è stato cambiato
differenze nel campo: marca
Intel-Corporation
differenze nel campo: nome del modello
Intel Corporation 82574L Gigabit Network Connection
differenze nel campo: eventuali altri nomi del dispositivo
Intel Gigabit CT Desktop Adapter (EXPI9301CT)
Intel® 82574L Gigabit Ethernet Controller
Super Micro Computer Inc 82574L Gigabit Network Connection
differenze nel campo: codice VendorID:ProductID del prodotto
8086:10d3
differenze nel campo: anno di commercializzazione
2008
differenze nel campo: interfaccia
PCI-E
differenze nel campo: distribuzione GNU/Linux usata per il test
parabola, trisquel_7_0
differenze nel campo: testato con il seguente kernel libre
5.1.6-gnu-1, 2.6.35-30-generic, Linux-libre 3.13.0-121-lowlatency
differenze nel campo: funziona con il software libero?
yes
differenze nel campo: driver liberi usati
e1000e
differenze nel campo: Descrizione
[p]lspci -nnk[/p]
[code]
lspci -nnk
03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Subsystem: Intel Corporation Device [8086:3578]
Kernel driver in use: e1000e
Kernel modules: e1000e
[/code]
[p]lspci -vmmnn[/p]
[code]
lspci -vmmnn
Slot: 03:00.0
Class: Ethernet controller [0200]
Vendor: Intel Corporation [8086]
Device: 82574L Gigabit Network Connection [10d3]
SVendor: Intel Corporation [8086]
SDevice: Device [3578]
[/code]
[p]lspci -vvnnk[/p]
[code]02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Subsystem: Super Micro Computer Inc 82574L Gigabit Network Connection [15d9:10d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbee0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at cc00 [size=32]
Region 3: Memory at fbedc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <128ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [a0] MSI-X: Enable+ Count=5 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Kernel driver in use: e1000e
Kernel modules: e1000e
[/code]
[code]
sudo ethtool eth1
Settings for eth1:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: off (auto)
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
[/code]
[h1]References[/h1]
[enum][a]https://www.intel.com/content/www/us/en/support/network-and-i-o/ethernet-products/000006709.html | Supported Operating Systems for Intel® Gigabit CT Desktop Adapter[/a][/enum]
I contenuti di questa pagina sono di Pubblico Dominio. (leggi la
pagina CC0 per informazioni dettagliate). Chiunque è libero di copiare, modificare, pubblicare, usare, vendere, o distribuire tale contenuto per qualsiasi fine, commerciale o non commerciale, e con ogni mezzo.
