Differenze tra la revisione del 03:58, 13 aprile 2020, creata da Arshin, e la revisione del 01:41, 21 settembre 2019
Nota: il testo in rosso è stato cancellato dalla revisione precedente, il testo in verde è stato aggiunto in questa revisione e il testo in grigio non è stato cambiato
differenze nel campo: marca
D-Link-Corp.
differenze nel campo: nome del modello
D-Link USB 3.0 Gigabit Ethernet Adapter DUB-1312
differenze nel campo: eventuali altri nomi del dispositivo
differenze nel campo: codice VendorID:ProductID del prodotto
2001:4a00
differenze nel campo: anno di commercializzazione
2015
differenze nel campo: interfaccia
USB
differenze nel campo: distribuzione GNU/Linux usata per il test
parabola
differenze nel campo: testato con il seguente kernel libre
5.2.5-gnu-1
differenze nel campo: funziona con il software libero?
yes
differenze nel campo: driver liberi usati
ax88179_178a
differenze nel campo: Descrizione
[p]It is a USB3 1Gbit/s adapter. I didn't test tested it at 1Gbit/s speed yet, only at 100Mbit/s.[/p] - works fine for long periods (several hours).[/p]
lsusb:
[code]Bus 002 Device 010: ID 2001:4a00 D-Link Corp. D-Link DUB-1312[/code]
usb-devices:
[code]
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ff(vend.) Sub=ff Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2001 ProdID=4a00 Rev=01.00
S: Manufacturer=D-Link Elec. Corp.
S: Product=D-Link DUB-1312
S: SerialNumber=**************
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=248mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=ax88179_178a
[/code]
ethtool:
[code]
Settings for enp0s29f7u2:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Link partner advertised pause frame use: Symmetric Receive-only
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 3
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pg
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
[/code]
I contenuti di questa pagina sono di Pubblico Dominio. (leggi la pagina CC0 per informazioni dettagliate). Chiunque è libero di copiare, modificare, pubblicare, usare, vendere, o distribuire tale contenuto per qualsiasi fine, commerciale o non commerciale, e con ogni mezzo.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information