Home » Hardware » Κάρτες wifi » Linksys WUSB54AG 802.11a/g Adapter [Intersil IS L3887]
Κάρτες wifi Linksys WUSB54AG 802.11a/g Adapter [Intersil IS L3887]
Μοντέλο: Linksys WUSB54AG 802.11a/g Adapter [Intersil IS L3887](Κωδικός id του μοντέλου: 2021)
Άλλα πιθανά ονόματα της συσκευής:
Linksys Wireless A/G USB Network Adapter
Κατασκευαστής:
Linksys
Κωδικός Κατασκευαστή:Κωδικός Προϊόντος:
13b1:000c
Έτος εμπορικής κυκλοφορίας:
2004
Διεπαφή:
USB
Δοκιμάσθηκε με:
Trisquel 8.0 Flidas
Δοκιμάσθηκε με τον εξής ελεύθερο πυρήνα:
4.4.0-141-generic
Λειτουργεί με ελεύθερο λογισμικό;
όχι
Ελεύθεροι οδηγοί/driver που χρησιμοποιήθηκαν:
Περιγραφή:
lsusb:
Bus 001 Device 006: ID 13b1:000c Linksys WUSB54AG 802.11a/g Adapter [Intersil ISL3887]
The 13b1:000c Linksys WUSB54AG 802.11a/g Adapter [Intersil ISL3887] DOES NOT WORK with free software because the p54usb driver requires non-free firmware to support this device. After connecting this device, no new network interface appears. Kernel log excerpt from Trisquel GNU/Linux 8/Flidas is reproduced below:
localhost kernel: [   80.624018] usb 1-7: new high-speed USB device number 6 using ehci-pci
localhost kernel: [   80.760762] usb 1-7: New USB device found, idVendor=13b1, idProduct=000c
localhost kernel: [   80.760767] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
localhost kernel: [   80.760771] usb 1-7: Product: Wireless A/G USB Network Adapter
localhost kernel: [   80.760775] usb 1-7: Manufacturer: Cisco Linksys
localhost kernel: [   81.048018] usb 1-7: reset high-speed USB device number 6 using ehci-pci
localhost kernel: [   81.180565] usb 1-7: Loading firmware file /*(DEBLOBBED)*/
localhost kernel: [   81.180570] 1-7: Missing Free firmware (non-Free firmware loading is disabled)
localhost kernel: [   81.180625] usb 1-7: (p54usb) cannot load firmware /*(DEBLOBBED)*/ (-22)!
localhost kernel: [   81.180686] p54usb: probe of 1-7:1.0 failed with error -22
localhost kernel: [   81.180732] usbcore: registered new interface driver p54usb
localhost kernel: [   81.181521] usb 1-7: Direct firmware load failed with error -2
This device DOES NOT work with free software. Weighing only a few grams, it is neither heavy enough to make a good paperweight.

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information