Home » Hardware » wifi cards » WUSB54GC v1 802.11g Adapter [Ralink RT73]
wifi card WUSB54GC v1 802.11g Adapter [Ralink RT73]
model: WUSB54GC v1 802.11g Adapter [Ralink RT73](model id: 381)
VendorID:ProductID code of the device:
year of commercialization:
tested on:
Parabola GNU/Linux
Trisquel 7.0 Belenos
Trisquel 10.0 Nabia
tested with the following kernel libre:
does it work with free software?
free driver used:
Parabola (2011):
[10444.358998] usb 2-3: new high speed USB device number 3 using ehci_hcd
[10445.023762] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[10445.024968] Registered led device: rt73usb-phy1::radio
[10445.025004] Registered led device: rt73usb-phy1::assoc
[10445.025039] Registered led device: rt73usb-phy1::quality
[10445.025506] usbcore: registered new interface driver rt73usb
[10473.319823] NET: Registered protocol family 4
[10473.327152] NET: Registered protocol family 5
[10473.328825] 2-3:1.0: Missing Free firmware
[10473.344345] phy1 -> rt2x00lib_reject_firmware: Error - Failed to request Firmware.
lsusb -v
Bus 001 Device 007: ID 13b1:0020 Linksys WUSB54GC v1 802.11g Adapter [Ralink RT73]
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x13b1 Linksys
  idProduct          0x0020 WUSB54GC v1 802.11g Adapter [Ralink RT73]
  bcdDevice            0.01
  iManufacturer           1 Cisco-Linksys
  iProduct                2 Compact Wireless-G USB Adapter
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0020
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              300mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
hwinfo --usb (from Trisquel 11.0, kernel 5.15.0-88-generic)
04: USB 00.0: 0200 Ethernet controller
  [Created at usb.122]
  Unique ID: cLrx.4mAUGuwfO1A
  Parent ID: k4bc.2DFUsyrieMD
  SysFS ID: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0
  SysFS BusID: 1-2:1.0
  Hardware Class: network
  Model: "Linksys WUSB54GC v1 802.11g Adapter [Ralink RT73]"
  Hotplug: USB
  Vendor: usb 0x13b1 "Linksys"
  Device: usb 0x0020 "WUSB54GC v1 802.11g Adapter [Ralink RT73]"
  Revision: "0.01"
  Driver: "rt73usb"
  Driver Modules: "rt73usb"
  Device File: wlx001c10e313ce
  Speed: 480 Mbps
  HW Address: 00:1c:10:e3:13:ce
  Permanent HW Address: 00:1c:10:e3:13:ce
  Link detected: no
  Module Alias: "usb:v13B1p0020d0001dc00dsc00dp00icFFiscFFipFFin00"
  Driver Info #0:
    Driver Status: rt73usb is active
    Driver Activation Cmd: "modprobe rt73usb"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #7 (Hub)

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information