Διαφορές ανάμεσα στην αναθεώρηση του/της 10:33, 9 Νοέμβριος 2023, που δημιουργήθηκε από τον/την dadu33, και την αναθεώρηση του/της 10:32, 9 Νοέμβριος 2023
Σημείωση: το κείμενο με κόκκινο έχει διαγραφεί από την προηγούμενη αναθεώρηση, το κείμενο με πράσινο έχει προστεθεί σε αυτή την αναθεώρηση και το κείμενο με γκρι δεν έχει αλλαχθεί
Διαφορές στην καταχώρηση: Κατασκευαστής
Linksys
Διαφορές στην καταχώρηση: Όνομα του μοντέλου
WUSB54GC v1 802.11g Adapter [Ralink RT73]
Διαφορές στην καταχώρηση: Άλλα πιθανά ονόματα της συσκευής
Διαφορές στην καταχώρηση: Κωδικός Κατασκευαστή:Κωδικός Προϊόντος
13b1:0020
Διαφορές στην καταχώρηση: Έτος εμπορικής κυκλοφορίας
2007
Διαφορές στην καταχώρηση: Διεπαφή
USB
Διαφορές στην καταχώρηση: Διανομή GNU/Linux που χρησιμοποιήθηκε για την δοκιμή
parabola , trisquel_7_0 , trisquel_10_0
Διαφορές στην καταχώρηση: Δοκιμάσθηκε με τον εξής ελεύθερο πυρήνα
3.0.3-1, 3.13.0-100-lowlatency, 5.4.0-139-generic
Διαφορές στην καταχώρηση: Λειτουργεί με ελεύθερο λογισμικό;
no
Διαφορές στην καταχώρηση: Ελεύθεροι οδηγοί/driver που χρησιμοποιήθηκαν
rt73usb
Διαφορές στην καταχώρηση: Περιγραφή
Parabola : [b]Parabola (2011):[/b]
[code][10444.358998] usb 2-3: new high speed USB device number 3 using ehci_hcd
[10445.023762] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[10445.024968] Registered led device: rt73usb-phy1::radio
[10445.025004] Registered led device: rt73usb-phy1::assoc
[10445.025039] Registered led device: rt73usb-phy1::quality
[10445.025506] usbcore: registered new interface driver rt73usb
[10473.319823] NET: Registered protocol family 4
[10473.327152] NET: Registered protocol family 5
[10473.328825] 2-3:1.0: Missing Free firmware
[10473.344345] phy1 -> rt2x00lib_reject_firmware: Error - Failed to request Firmware.[/code]

[b]lsusb -v[/b]
[code]
Bus 001 Device 007: ID 13b1:0020 Linksys WUSB54GC v1 802.11g Adapter [Ralink RT73]
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x13b1 Linksys
idProduct 0x0020 WUSB54GC v1 802.11g Adapter [Ralink RT73]
bcdDevice 0.01
iManufacturer 1 Cisco-Linksys
iProduct 2 Compact Wireless-G USB Adapter
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0020
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 300mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
[/code]


[b]hwinfo --usb[/b] (from Trisquel 11.0, kernel 5.15.0-88-generic)
[code]
04: USB 00.0: 0200 Ethernet controller
[Created at usb.122]
Unique ID: cLrx.4mAUGuwfO1A
Parent ID: k4bc.2DFUsyrieMD
SysFS ID: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0
SysFS BusID: 1-2:1.0
Hardware Class: network
Model: "Linksys WUSB54GC v1 802.11g Adapter [Ralink RT73]"
Hotplug: USB
Vendor: usb 0x13b1 "Linksys"
Device: usb 0x0020 "WUSB54GC v1 802.11g Adapter [Ralink RT73]"
Revision: "0.01"
Driver: "rt73usb"
Driver Modules: "rt73usb"
Device File: wlx001c10e313ce
Speed: 480 Mbps
HW Address: 00:1c:10:e3:13:ce
Permanent HW Address: 00:1c:10:e3:13:ce
Link detected: no
Module Alias: "usb:v13B1p0020d0001dc00dsc00dp00icFFiscFFipFFin00"
Driver Info #0:
Driver Status: rt73usb is active
Driver Activation Cmd: "modprobe rt73usb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #7 (Hub)
[/code]
The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information