Differences between the revision of 18:32, 7 May 2016, created by mangeurdenuage, and the revision of 23:59, 6 May 2016
Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
differences in the entry: vendor
Ralink-corp.
differences in the entry: model name
Ralink corp. RT2500 Wireless 802.11bg (rev 01)
differences in the entry: possible other names of the device
Linksys WMP54G v4.0 PCI Adapter
differences in the entry: VendorID:ProductID code of the device
1814:0201
differences in the entry: year of commercialization
2011
differences in the entry: interface
PCI
differences in the entry: GNU/Linux distribution used for the test
trisquel_6_0 , trisquel_7_0
differences in the entry: tested with the following kernel libre
3.2.0-38-generic-pae, 4.5.2-gnu
differences in the entry: does it work with free software?
yes
differences in the entry: free driver used
rt2500pci
differences in the entry: Description
Kernel module: rt2500pci


[h1]Trisquel 7[/h1]
[p]Does not work with trisquel 7[/p]
[p]Normally the ralink RT2500 should work but because of Linksys added non-free blob/dependencies[/p]
[p]("fwcutter_list.h" and "ucode4.fw")[/p]
[p]the bad software was removed from trisquel[/p]

[h2]lspci -nnk[/h2]
[code]
02:04.0 Network controller [0280]: Ralink corp. RT2500 Wireless 802.11bg [1814:0201] (rev 01)
Subsystem: Linksys WMP54G v4.0 PCI Adapter [1737:0032]
Kernel driver in use: rt2500pci
[/code]
[h2]sudo lspci -vnnk[/h2]
[code]
02:04.0 Network controller [0280]: Ralink corp. RT2500 Wireless 802.11bg [1814:0201] (rev 01)
Subsystem: Linksys WMP54G v4.0 PCI Adapter [1737:0032]
Flags: bus master, slow devsel, latency 32, IRQ 16
Memory at fdefc000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Kernel driver in use: rt2500pci

[/code]
The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information