Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
differences in the entry: vendor
VIA-Technologies-Inc.
differences in the entry: model name
VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 11)
differences in the entry: possible other names of the device
VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 01)
ASUSTeK Computer Inc. K8M890CE/K8N890CE [Chrome 9]
differences in the entry: VendorID:ProductID code of the device
1106:3230
differences in the entry: year of commercialization
not-specified 2003
differences in the entry: interface
not-specified
differences in the entry: GNU/Linux distribution used for the test
parabola, trisquel_5_5
differences in the entry: tested with the following kernel libre
5.4.12-gnu-1, 3.0.0-17-generic
differences in the entry: how does it work with free software?
works_without_3D
differences in the entry: free driver used
viafb
differences in the entry: Description
[p]The old insertion with Trisquel 5.5 says it doesn't work, but it may have changed over time. On Parabola with the libre kernel the via driver is missing so it doesn't work except for the framebuffer console but i will do more tests with a different distro to make sure.[/p]
[p]lspci -vmmnn[/p]
[code]
Slot: 01:00.0
Class: VGA compatible controller [0300]
Vendor: VIA Technologies, Inc. [1106]
Device: K8M890CE/K8N890CE [Chrome 9] [3230]
SVendor: ASUSTeK Computer Inc. [1043]
SDevice: Device [81b5]
Rev: 11
[/code]
[p]lspci -nnk[/p]
[code]
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] [1106:3230] (rev 11)
Subsystem: ASUSTeK Computer Inc. Device [1043:81b5]
Kernel modules: viafb
[/code]
[p]lspci -vvnnk[/p]
[code]
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] [1106:3230] (rev 11) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. K8M890CE/K8N890CE [Chrome 9] [1043:81b5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min)
Interrupt: pin A routed to IRQ 11
NUMA node: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>[/code]
The contents of this page are in the Public Domain. (see the
CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
