Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
Unterschiede: Hersteller
VIA-Technologies-Inc.
Unterschiede: Modellbezeichnung
VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 11)
Unterschiede: Andere mögliche Gerätenamen
VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 01)
ASUSTeK Computer Inc. K8M890CE/K8N890CE [Chrome 9]
Unterschiede: Hersteller-ID:Produkt-ID des Gerätes
1106:3230
Unterschiede: Jahr der Markteinführung
not-specified 2003
Unterschiede: Schnittstelle
not-specified
Unterschiede: Verwendete GNU/Linux-Distribution für die Überprüfung
parabola, trisquel_5_5
Unterschiede: Überbrüft mit folgendem freien Betriebssystemkern (Libre Kernel)
5.4.12-gnu-1, 3.0.0-17-generic
Unterschiede: Funktioniert einwandfrei mit Freie Software?
works_without_3D
Unterschiede: Verwendete Freie Firmware/Treiber
viafb
Unterschiede: Beschreibung
[p]The old insertion with Trisquel 5.5 says it doesn't work, but it may have changed over time. On Parabola with the libre kernel the via driver is missing so it doesn't work except for the framebuffer console but i will do more tests with a different distro to make sure.[/p]
[p]lspci -vmmnn[/p]
[code]
Slot: 01:00.0
Class: VGA compatible controller [0300]
Vendor: VIA Technologies, Inc. [1106]
Device: K8M890CE/K8N890CE [Chrome 9] [3230]
SVendor: ASUSTeK Computer Inc. [1043]
SDevice: Device [81b5]
Rev: 11
[/code]
[p]lspci -nnk[/p]
[code]
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] [1106:3230] (rev 11)
Subsystem: ASUSTeK Computer Inc. Device [1043:81b5]
Kernel modules: viafb
[/code]
[p]lspci -vvnnk[/p]
[code]
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] [1106:3230] (rev 11) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. K8M890CE/K8N890CE [Chrome 9] [1043:81b5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min)
Interrupt: pin A routed to IRQ 11
NUMA node: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>[/code]
The contents of this page are in the Public Domain. (see the
CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
