lspci -vvnnk [p]Works without problems, just like with the rest of the ancient nvidia cards.[/p]
[p]lspci -vvnnk[/p]
[code]01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV11 [GeForce2 MX/MX 400] [10de:0110] (rev b2) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
Kernel driver in use: nouveau
Kernel modules: nouveau[/code]
glxheads [code]01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV11 [GeForce2 MX/MX 400] [10de:0110] (rev b2) (prog-if 00 [VGA controller])
Subsystem: PROLINK Microsystems Corp MVGA-NVG11AM(400) [1554:1081]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW+ Rate=x4
Kernel driver in use: nouveau
Kernel modules: nouveau[/code]
[p]glxheads[/p]
[code] Display: 0x6e4d20
Window: 0x1200002
Context: 0x6f65e0
GL_VERSION: 1.2 Mesa 19.0.5
GL_VENDOR: Nouveau
GL_RENDERER: Mesa DRI nv11 x86/MMX/SSE2[/code]
[p]hwinfo --gfxcard[/p]
[code] 20: PCI(AGP) 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.386]
Unique ID: VCu0.YByOHIP6pc8
Parent ID: vSkL.ITQqGs0XM26
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "PROLINK Microsystems MVGA-NVG11AM(400)"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0110 "GeForce2 MX/MX 400"
SubVendor: pci 0x1554 "PROLINK Microsystems Corp"
SubDevice: pci 0x1081 "MVGA-NVG11AM(400)"
Revision: 0xb2
Driver: "nouveau"
Driver Modules: "nouveau"
Memory Range: 0xf9000000-0xf9ffffff (rw,non-prefetchable)
Memory Range: 0xf0000000-0xf7ffffff (ro,non-prefetchable)
Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
IRQ: 18 (67266 events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v000010DEd00000110sv00001554sd00001081bc03sc00i00"
Driver Info #0:
XFree86 v4 Server Module: nv
Driver Info #1:
XFree86 v4 Server Module: nvidia
3D Support: yes
Color Depths: 16
Extensions:
Options:
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #18 (PCI bridge)
Primary display adapter: #20[/code]
[p]dmesg[/p]
[code][ 64.155452] fb0: switching to nouveaufb from VESA VGA
[ 64.155733] Console: switching to colour dummy device 80x25
[ 64.156268] nouveau 0000:01:00.0: NVIDIA NV11 (011000b2)
[ 64.209471] nouveau 0000:01:00.0: bios: version 03.11.01.30.00
[ 64.210107] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 64.210127] agpgart-intel 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 64.210135] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 64.210166] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 64.210271] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 64.210284] agpgart-intel 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 64.210290] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 64.210320] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 64.210329] nouveau 0000:01:00.0: tmr: unknown input clock freq
[ 64.226031] nouveau 0000:01:00.0: fb: 64 MiB SDRAM
[ 64.256041] [TTM] Zone kernel: Available graphics memory: 122726 KiB
[ 64.256044] [TTM] Initializing pool allocator
[ 64.256053] [TTM] Initializing DMA pool allocator
[ 64.256092] nouveau 0000:01:00.0: DRM: VRAM: 63 MiB
[ 64.256095] nouveau 0000:01:00.0: DRM: GART: 64 MiB
[ 64.256101] nouveau 0000:01:00.0: DRM: BMP version 5.20
[ 64.256105] nouveau 0000:01:00.0: DRM: No useful DCB data in VBIOS
[ 64.266886] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[ 64.267461] nouveau 0000:01:00.0: DRM: No useful DCB data in VBIOS
[ 64.268678] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 64.268680] [drm] Driver supports precise vblank timestamp query.
[ 64.356937] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x8000, bo 4b479bc3
[ 64.362522] fbcon: nouveaudrmfb (fb0) is primary device
[ 64.441543] Console: switching to colour frame buffer device 160x64[/code]
