Home » Hardware » soundcards » C-Media CMI8330/C3D
soundcard C-Media CMI8330/C3D
Modell: C-Media CMI8330/C3D(Modell-ID: 2128)
Andere mögliche Gerätenamen:
CMI8330
CHX-B
Hersteller:
C-Media Electronics Inc
Hersteller-ID:Produkt-ID des Gerätes:
13f6:0001
Jahr der Markteinführung:
2002
Schnittstelle:
ISA
überprüft mit Distribution:
Parabola GNU/Linux
Überbrüft mit folgendem freien Betriebssystemkern (Libre Kernel):
5.4.2-gnu-1
Funktioniert mit Freie Software?
Ja
Verwendete Freie Firmware/Treiber:
snd-cmi8330
Beschreibung:

Sound Blaster 16 clone. It doesn't work even after inserting the required module, it loads and apears to work but there is no sound output. The front plate doesn't have the jacks labeled so i'm not sure which is the speaker one, but one of them produces white noise when plugging. I tested even the CD-in and it still refuses to work. There are some errors on dmesg but I doubt there's a problem with the driver so most likely it's my card the faulty one.

It works now, not sure if the updated kernel or a setting made a difference. Like the rest of the ISA cards the module has to be modprobed

modprobe snd-cmi8330
is this case. Fabrication year from the sticker on the back of it shows 2002/9.

hwinfo --verbose --sound

23: ISA(PnP) 01.0: 0401 Multimedia audio controller             
  [Created at isapnp.142]
  Unique ID: R_Yp.eYoMb3EKowF
  SysFS ID: /devices/pnp1/01:01/01:01.00
  SysFS BusID: 01:01.00
  Hardware Class: sound
  Model: "CMI8330. Audio Adapter"
  Vendor: CMI 
  Device: eisa 0x0001 "CMI8330. Audio Adapter"
  SubVendor: @@@ 
  SubDevice: eisa 0x0001 
  Driver Info #0:
    Driver Status: snd-cmi8330 is active
    Driver Activation Cmd: "modprobe snd-cmi8330"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  

dmesg

[  559.010976] cmi8330 01:01.00: [io  0x0530-0x0537]
[  559.011003] cmi8330 01:01.00: [io  0x0388-0x038f]
[  559.011064] cmi8330 01:01.00: [io  0x0530-0x0537]
[  559.011087] cmi8330 01:01.00: [io  0x0388-0x038f]
[  559.011193] cmi8330 01:01.00: [irq 5]
[  559.011213] cmi8330 01:01.00: [dma 1]
[  559.013511] cmi8330 01:01.00: activated
[  559.013539] cmi8330 01:01.03: [io  0x0220-0x022f]
[  559.013673] cmi8330 01:01.03: [irq 10]
[  559.013693] cmi8330 01:01.03: [dma 3]
[  559.013709] cmi8330 01:01.03: [dma 5]
[  559.019054] cmi8330 01:01.03: activated
[  559.019100] cmi8330 01:01.01: [io  0x0330-0x0331]
[  559.019146] cmi8330 01:01.01: [io  0x0300-0x0301]
[  559.019344] cmi8330 01:01.01: unable to assign resources
[  559.019358] SA sound/isa/cmi8330.c:378 MPU-401 PnP configure failure: will be disabled
[  559.027470] SA sound/isa/wss/wss_lib.c:447 mce_down - exit = 0xb
[  559.037518] SA sound/isa/wss/wss_lib.c:447 mce_down - exit = 0xb
[  559.047509] SA sound/isa/wss/wss_lib.c:447 mce_down - exit = 0xb
[  559.057508] SA sound/isa/wss/wss_lib.c:447 mce_down - exit = 0xb
[  559.067510] SA sound/isa/wss/wss_lib.c:447 mce_down - exit = 0xb

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information