Home » Hardware » scanners » CanoScan LiDE 110
scanner CanoScan LiDE 110
model: CanoScan LiDE 110(model id: 229)
possible other names of the device:
Canon CanoScan LiDE 110
vendor:
Canon, Inc.
VendorID:ProductID code of the device:
04a9:1909
year of commercialization:
2010
interface:
USB
tested on:
Parabola GNU/Linux
Trisquel 4.0 Taranis
Trisquel 5.5 Brigantia
tested with the following kernel libre:
2.6.32-31-generic
3.0.0-22-generic
compatibility with free software:
B-Partial
free driver used:
genesys (1.0-62)
Description:

Flatbed scanner

Basic scanning works fine with good quality on Trisquel 5.5 using the pre-installed Simple Scan program which can be found in the main menu under Graphics. No extra steps are required for this. Just plug in the USB cable and you are ready. The scanner has four extra function buttons which do not work, so the only option is to use the Simple Scan program. The buttons are called PDF, AUTO SCAN, COPY and E-MAIL.

sudo lsusb -v

Bus 001 Device 003: ID 04a9:1909 Canon, Inc. CanoScan LiDE 110
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0        64
  idVendor           0x04a9 Canon, Inc.
  idProduct          0x1909 CanoScan LiDE 110
  bcdDevice            7.01
  iManufacturer           1 Canon
  iProduct                2 CanoScan
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval               8
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Older entry for Trisquel 4.0:

On Parabola GNU/Linux-libre with kernel 2.6.39.3-1 and SANE 1.0.22-2 it needed just unlocking and connecting the device to scan with Skanlite.

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information