Home » Hardware » scanners » Canon Pixma MP830 Scanner
scanner Canon Pixma MP830 Scanner
model: Canon Pixma MP830 Scanner(model id: 2141)
possible other names of the device:
MP830
vendor:
Canon, Inc.
VendorID:ProductID code of the device:
04a9:1713
year of commercialization:
not-specified
interface:
USB
tested on:
Parabola GNU/Linux
tested with the following kernel libre:
5.4.12-gnu-1
compatibility with free software:
A-Full
free driver used:
usblp
Description:

dmesg

[   80.679776] usb 1-2: new high-speed USB device number 3 using ehci-pci
[   80.705953] usb 1-2: New USB device found, idVendor=04a9, idProduct=1713, bcdDevice= 1.14
[   80.705956] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   80.705959] usb 1-2: Product: MP830
[   80.705961] usb 1-2: Manufacturer: Canon
[   80.705963] usb 1-2: SerialNumber: 1899CE
[   80.706971] usb-storage 1-2:1.2: USB Mass Storage device detected
[   80.718349] scsi host3: usb-storage 1-2:1.2
[   80.773471] usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1713
[   80.774657] usblp 1-2:1.3: usblp1: USB Bidirectional printer dev 3 if 3 alt 0 proto 2 vid 0x04A9 pid 0x1713
[   80.774707] usbcore: registered new interface driver usblp
[   81.735026] scsi 3:0:0:0: Direct-Access     Canon    MP830Storage     0114 PQ: 0 ANSI: 2
[   81.736762] sd 3:0:0:0: Power-on or device reset occurred
[   81.769520] sd 3:0:0:0: [sdf] Attached SCSI removable disk
[  118.565836] ppdev: user-space parallel port driver
[  118.588085] lp: driver loaded but no devices found

hwinfo --printer

14: USB 00.3: 10900 Printer                                     
  [Created at usb.122]
  Unique ID: ztb8.ABpftCGFRY8
  Parent ID: k4bc.9T1GDCLyFd9
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.3
  SysFS BusID: 1-2:1.3
  Hardware Class: printer
  Model: "Canon PIXMA MP830 Scanner"
  Hotplug: USB
  Vendor: usb 0x04a9 "Canon"
  Device: usb 0x1713 "PIXMA MP830 Scanner"
  Revision: "1.14"
  Serial ID: "1899CE"
  Driver: "usblp"
  Driver Modules: "usblp"
  Speed: 480 Mbps
  Module Alias: "usb:v04A9p1713d0114dc00dsc00dp00ic07isc01ip02in03"
  Driver Info #0:
    Driver Status: usblp is active
    Driver Activation Cmd: "modprobe usblp"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #16 (Hub)

ususb -v

Bus 001 Device 003: ID 04a9:1713 Canon, Inc. PIXMA MP830 Scanner
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x04a9 Canon, Inc.
  idProduct          0x1713 PIXMA MP830 Scanner
  bcdDevice            1.14
  iManufacturer           1 Canon
  iProduct                2 MP830
  iSerial                 3 1899CE
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x006c
    bNumInterfaces          4
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0 
      bInterfaceProtocol    255 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x07  EP 7 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x88  EP 8 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x89  EP 9 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval              11
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
            bNumEndpoints           2
      bInterfaceClass         7 Printer
      bInterfaceSubClass      1 Printer
      bInterfaceProtocol      2 Bidirectional
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         7 Printer
      bInterfaceSubClass      1 Printer
      bInterfaceProtocol      2 Bidirectional
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x0a  EP 10 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
	      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x8b  EP 11 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0001
  Self Powered

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information