Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
differences in the entry: vendor
Canon-Inc.
differences in the entry: model name
CanoScan LiDE 50/LiDE 35/LiDE 40
differences in the entry: possible other names of the device
CanoScan LiDE 35
differences in the entry: VendorID:ProductID code of the device
04a9:2213
differences in the entry: year of commercialization
not-specified
differences in the entry: interface
USB
differences in the entry: GNU/Linux distribution used for the test
trisquel_5_5
differences in the entry: compatibility with free software
B-Partial
differences in the entry: tested with the following kernel libre
3.0.0-20-generic
differences in the entry: free driver used
differences in the entry: Description
[p]Basic scanning works fine with good quality on Trisquel 5.5 using the pre-installed [b]Simple Scan[/b] program which can be found in the main menu under Graphics. The scanner has four extra function buttons which do not work. These are used for starting the scanning process, printing the scanned document right away, saving scannable document in pre-defined location and attaching the scanned document to e-mail. Not even the simple scan button works, so [b]the only option[/b] is to use the SImple Simple Scan program.[/p]
[p]lsusb -v[/p]
[code]
Bus 001 Device 002: ID 04a9:2213 Canon, Inc. CanoScan LiDE 50/LiDE 35/LiDE 40
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x04a9 Canon, Inc.
idProduct 0x2213 CanoScan LiDE 50/LiDE 35/LiDE 40
bcdDevice 3.05
iManufacturer 1 Canon
iProduct 2 CanoScan
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 8
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0002
(Bus Powered)
Remote Wakeup Enabled
[/code]
The contents of this page are in the Public Domain. (see the
CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
