The Brother HL-1110 is supported on GNU/Linux and BSD by the brlaser CUPS driver created, and maintained at time of writing, by Peter De Watcher. On Debian 10.6, the driver is installed by default but the required Printer Description (ppd) files are not included. These ppd files must be manually generated and installed.
Documents that are mostly text and line drawings in simple page layouts are adequately handled by brlaser at full speed. On the other hand, due to memory limitations, jobs exceeding around 800KiB may not finish successfully. The driver does not work around this limitation. Both 300DPI and 600DPI resolution modes have been verified to work.
This method does not require build tools to be installed. Only CUPS, along with the PPD compiler command ppdc and the brlaser driver are needed on the host system.
ppdc -v brlaser.drv.in
/usr/sbin/lpinfo -vA list of names and/or URIs should appear. Watch out for something that looks like this:
/usr/sbin/lpadmin -p 'Brother_HL1110' -v usb://Brother/HL-1110%20series?serial=DEADBEEF \ -P br1110.ppd -L 'Your room' -E # Replace the serial number DEADBEEF with the number of your device, # and replace or omit the optional location specified by the -L option # as appropriate.If a desktop environment is in use, the DE's control panel can also be used instead. The CUPS control panel (accessible from the host system at http://localhost:631 by default with a web browser) is yet another way to install the printer.
The instructions above are for stock Debian systems. On some systems, the /usr/sbin part from the command may be omitted as appropriate.
If brlaser is not installed on your system and no binaries have been made publicly available for your distribution, the driver must be built from scratch. In this case, follow the build instructions at the brlaser GitHub repository. Build tools and related packages will be required.
To maximise the success rate of a print job, try to keep the print job under 800KiB by minimising the complexity of the page layouts.
Use raster images and gradient fills sparingly; these elements can increase the size of the print job.
Please avoid using the 1200HQ option as it currently does not work.
The HL-1110 has only 1MB of memory, and some of it is used up by the device's firmware during normal operation.
The HL-1110 has a native print resolution of 600x600 DPI.
This printer implements a subset of PCL-5. While it responds to PJL commands, all printed content must be sent as a run-length encoded (RLE) raster. The encoding format is described in detail in the Brother Printer Technical Reference Guide (Chapter 2, Part 6.3). The compression is most effective when there are many contiguous regions of black or white on the page.
brlaser GitHub repository. https://github.com/pdewacht/brlaser
Brother Printer Technical Reference Guide. Version AC. https://download.brother.com/welcome/doc002907/Tech_Manual_AC.pdf
Support and Downloads | HL-1110. Brother Industries. https://support.brother.com/g/b/producttop.aspx?c=eu_ot&lang=en&prod=hl1110_us_eu_as
|Συσκευές ανγνώρισης δακτυλικών αποτυπωμάτων||11|
|Συσκευές ανάγνωσης καρτών SD||52|
|Διαδικτυακές κάμερες Webcam||125|