Home » Hardware » Εκτυπωτές » Canon, Inc. » Ιστορικό » Διαφορές
Διαφορές ανάμεσα στην αναθεώρηση του/της 18:22, 19 Ιούνιος 2019, που δημιουργήθηκε από τον/την NewGnuGuy, και την αναθεώρηση του/της 17:52, 4 Φεβρουάριος 2019
Σημείωση: το κείμενο με κόκκινο έχει διαγραφεί από την προηγούμενη αναθεώρηση, το κείμενο με πράσινο έχει προστεθεί σε αυτή την αναθεώρηση και το κείμενο με γκρι δεν έχει αλλαχθεί
Διαφορές στην καταχώρηση: Κατασκευαστής
Canon-Inc.
Διαφορές στην καταχώρηση: Όνομα του μοντέλου
Canon, Inc.
Διαφορές στην καταχώρηση: Άλλα πιθανά ονόματα της συσκευής
Canon PIXMA iP2820
Διαφορές στην καταχώρηση: Υποτύπος (laser, inkjet, ..)
inkjet
Διαφορές στην καταχώρηση: Κωδικός Κατασκευαστή:Κωδικός Προϊόντος
04a9:10e4
Διαφορές στην καταχώρηση: Έτος εμπορικής κυκλοφορίας
2015
Διαφορές στην καταχώρηση: Διεπαφή
USB
Διαφορές στην καταχώρηση: Διανομή GNU/Linux που χρησιμοποιήθηκε για την δοκιμή
trisquel_8_0
Διαφορές στην καταχώρηση: Συμβατότητα με το ελεύθερο λογισμικό
B-Partial
Διαφορές στην καταχώρηση: Υιοθετεί οποιεσδήποτε τεχνικές για παρακολούθηση των χρηστών;
no
Διαφορές στην καταχώρηση: Δοκιμάσθηκε με τον εξής ελεύθερο πυρήνα
4.4.0-119-generic
Διαφορές στην καταχώρηση: Ελεύθεροι οδηγοί/driver που χρησιμοποιήθηκαν
CUPS 2.1.3-4ubuntu0.4 + Gutenprint 5.2.11
Διαφορές στην καταχώρηση: Περιγραφή
[p]Experiment
support for the Canon PIXMA iP2820 was added in version 5.2.11 of
Gutenprint. This version of Gutenprint first appeared in Debian 9
Stretch and Trisquel 8 Flidas.[/p]

Why only a 'B-Partial' rating:
[list]
[*] Anything below ~16mm from the bottom of a Letter size page gets
consistently cut off in my tests. I can print as close as 4mm to the
left and right sides of the page and as close as ~3.5mm to the top of
the page.[/*]
[*] Ink level reporting does not work.[/*]
[*] This model is only experimentally supported by Gutenprint.[/*]

[/list]

[p]According to the printer test page the PPD file in use is
STP00079.PPD.[/p]

# lsusb -v
[code]
Bus 002 Device 005: ID 04a9:10e4 Canon, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x04a9 Canon, Inc.
idProduct 0x10e4
bcdDevice 1.01
iManufacturer 1 Canon
iProduct 2 iP2800 series
iSerial 3 D3F190
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 7 Printer
bInterfaceSubClass 1 Printer
bInterfaceProtocol 2 Bidirectional
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
[/code]

# hwinfo --usb
[code]
05: USB 00.0: 10900 Printer
[Created at usb.122]
Unique ID: JPTW.WhDyV5klE05
Parent ID: FKGF.0j9+vWlqL56
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0
SysFS BusID: 2-1.3:1.0
Hardware Class: printer
Model: "Canon iP2800 series"
Hotplug: USB
Vendor: usb 0x04a9 "Canon"
Device: usb 0x10e4 "iP2800 series"
Revision: "1.01"
Serial ID: "D3F190"
Driver: "usblp"
Driver Modules: "usblp"
Speed: 480 Mbps
Module Alias: "usb:v04A9p10E4d0101dc00dsc00dp00ic07isc01ip02in00"
Driver Info #0:
Driver Status: usblp is active
Driver Activation Cmd: "modprobe usblp"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #11 (Hub)
[/code]
The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information