Home » Hardware » portátiles » N56VB-S3055H
portátil N56VB-S3055H
modelo: N56VB-S3055H(id del modelo: 1173)
subtipo (computadores portátiles, netbook, tarjeta madre, tablet):
computadores portátiles
fabricante:
ASUS
arquitectura:
x86-64/amd64
¿tiene un firmware boot (BIOS, UEFI,..) libre?
no
¿puede ser instalado un sistema libre?
si
¿el dispositivo evita la instalación de tarjetas inalámbricas no aprobadas por el distribuidor?
no
año de comercialización:
2013
compatibilidad con software libre:
A-platino
probado con:
Trisquel 6.0 Toutatis
probado con el siguiente kernel libre:
3.2.0-38-generic
modelo de tarjeta de video:
Intel Corporation Ivy Bridge Graphics Controller (rev 09) (funciona con aceleración 3D)
modelo de tarjeta de red inalámbrica:
Atheros Communications Inc. AR9485 Wireless Network Adapter (rev ff) (funciona)
modelo de cámara web:
Sunplus Innovation Technology Inc. (funciona)
Descripción:

The laptop works very well with fully free software (even suspend/resume works). There is an nVidia GeForce 740M graphics card too but it doesn't show up on lspci and might be handled with Bumblebee (not tested yet). I was told by Asus support that the same model might have a different wifi chipset (which is ath9k in my case).

It appears that the touchpad doesn't work well (with Linux 3.2): there is no right click support and it's not possible to move the cursor when clicking at the same time (no drag'n'drop).

However the BIOS is non-free and it ships with Secure Mode enabled. The BIOS can be accessed by booting with the ESC key pressed and then selecting the option to access Setup. Make sure that you do not let it boot the preinstalled Windows 8 as there is no way to soft turn the computer off if you don't agree to the license terms.

The laptop comes with SecureBoot and friends activated by default. Once you're in the BIOS, make sure you disable the following options:

  • Intel Anti-theft technology
  • Fast Boot
  • Secure Boot Control
Then enable the following options:
  • Launch CCSM (you might want to disable PXE then)

With that setup, you should be able to boot a regular GNU/Linux install disk or bootable USB (still using ESC to access the boot menu). However, the BIOS does not permit booting an operating system in BIOS-compatibility mode and only support UEFI booting. This is not such a big problem since GRUB can handle UEFI (and it works well in that case). So make sure the installation process creates an uefi partition (you might want to keep and format the one already there for Windows) and let GRUB install UEFI support there. If you don't create such a partition, the BIOS will refuse to boot the system.

Write below your motivation

El contenido de esta página está en Dominio Público. (vea la página CC0 para información detallada). Cualquiera es libre de copiar, modificar, publicar, usar, vender o distribuir el texto para cualquier propósito, comercial o no comercial, y por cualquier medio.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information