Home » Hardware » modems » Rockwell International HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem (rev 01) » History » Differences
Differences between the revision of 06:28, 16 June 2019, created by parajh7, and the revision of 06:23, 16 June 2019
Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
differences in the entry: vendor
Rockwell-International
differences in the entry: model name
Rockwell International HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem (rev 01)
differences in the entry: possible other names of the device
differences in the entry: VendorID:ProductID code of the device
127a:1025
differences in the entry: year of commercialization
not-specified
differences in the entry: interface
PCI
differences in the entry: GNU/Linux distribution used for the test
parabola
differences in the entry: tested with the following kernel libre
5.1.6-gnu-1
differences in the entry: does it work with free software?
no
differences in the entry: free driver used
differences in the entry: Description
[p]Two cards were tested, they have the same lspci -vvnnk output and don't bring up any kernel modules.[/p]
[p]lspci -vvnnk[/p]
[code]03:02.0 Communication controller [0780]: Rockwell International HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem [127a:1025] (rev 01)
Subsystem: Rockwell International HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem [127a:1025]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 15
Region 0: Memory at febf0000 (32-bit, non-prefetchable) [size=64K]
Region 1: I/O ports at ec00 [size=8]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
[/code]
The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information