model: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller (rev 03)(model id: 1627)
possible other names of the device:
NEC uPD720201
vendor:
Renesas Technology Corp.
subtype (PCMCIA, USB, Firewire, HECI):
USB Controller
VendorID:ProductID code of the device:
1912:0014
year of commercialization:
not-specified
tested on:
Trisquel 6.0 Toutatis
tested with the following kernel libre:
3.2.0-79-generic x86_64
does it work with free software?
no
free driver used:
xhci_hcd
Description:
Preparation
Run update-pciids if you have not done so. Reboot[1]. The new card should now be visible when you run lspci
1. Please remove this step from the wiki if you can confirm that this step is not necessary.
Notes
USB 3.0 did not work so it used USB 2.0 used as fallback.
Hardware information
Chipset: NEC uPD720201
Software information
lspci
04:00.0 USB controller: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller (rev 03)
lspci -v
04:00.0 USB controller: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI])
Subsystem: Renesas Technology Corp. Device 0015
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at ee000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
lspci -nnk
04:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller [1912:0014] (rev 03)
Subsystem: Renesas Technology Corp. Device [1912:0015]
Kernel driver in use: xhci_hcd
The contents of this page are in the Public Domain. (see the
CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.