Home » Hardware » host controllers » Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller 2 (rev 02)
host controller Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller 2 (rev 02)
model: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller 2 (rev 02)(model id: 1059)
possible other names of the device:
Dell 82801H (ICH8 Family) USB2 EHCI Controller
vendor:
Intel Corp.
subtype (PCMCIA, USB, Firewire, HECI):
HECI Controller
VendorID:ProductID code of the device:
8086:283a
year of commercialization:
2007
interface:
USB
tested on:
Parabola GNU/Linux
Trisquel 5.5 Brigantia
tested with the following kernel libre:
5.4.2-gnu-1
3.0.0-17-generic
does it work with free software?
yes
free driver used:
ehci_hcd
Description:
lspci -nnpk
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02)
lspci -vmmnn
Slot:	00:1a.7
Class:	USB controller [0c03]
Vendor:	Intel Corporation [8086]
Device:	82801H (ICH8 Family) USB2 EHCI Controller #2 [283a]
SVendor:	Intel Corporation [8086]
SDevice:	Device [514d]
Rev:	02
ProgIf:	20

lspci -vvnnk

00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Dell 82801H (ICH8 Family) USB2 EHCI Controller [1028:01f9]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 22
	Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information