Home » Hardware » host controllers » VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
host controller VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
model: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)(model id: 1048)
possible other names of the device:
VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller
EPoX Computer Co., Ltd. VT82xx/62xx UHCI USB 1.1 Controller
vendor:
VIA Technologies, Inc.
subtype (PCMCIA, USB, Firewire, HECI):
USB Controller
VendorID:ProductID code of the device:
1106:3038
year of commercialization:
2003
interface:
not-specified
tested on:
Parabola GNU/Linux
Trisquel 4.0 Taranis
tested with the following kernel libre:
5.2.5-gnu-1
2.6.32-24-generic
does it work with free software?
yes
free driver used:
uhci_hcd
Description:

part from Asus P5VD2-MX motherboard

lspci -vvnnk

00:10.0 USB controller [0c03]: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. [MSI] KT4AV motherboard [1462:7120]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 21
	Region 4: I/O ports at e000 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci_hcd
00:10.0 USB controller [0c03]: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
	Subsystem: EPoX Computer Co., Ltd. VT82xx/62xx UHCI USB 1.1 Controller [1695:3005]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 4: I/O ports at d000 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci_hcd

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information