Revisión - host controller Linux Foundation 3.0 root hub
Esta es una revisión anterior de esta página, editada por DavidHedlund en 22:01, 1 Julio 2017. Puede diferir significantemente de la Revisión actual.
modelo: Linux Foundation 3.0 root hub(id del modelo: 1905)
fabricante:
Linux Foundation
subtipo (PCMCIA, USB, Firewire, HECI):
Controlador USB
código VendorID:ProductID del dispositivo:
1d6b:0003
año de comercialización:
no especificado
interfaz:
USB
probado con:
Trisquel 7.0 Belenos
probado con el siguiente kernel libre:
Linux-libre 3.13.0-121-lowlatency
¿funciona con software libre?
si
driver libre usado:
xhci_hcd
Descripción:
lsusb
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
sudo lsusb -vd 1d6b:

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         3 
  bMaxPacketSize0         9
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0003 3.0 root hub
  bcdDevice            3.13
  iManufacturer           3 Linux 3.13.0-121-lowlatency xhci_hcd
  iProduct                2 xHCI Host Controller
  iSerial                 1 0000:03:00.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           31
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
        bMaxBurst               0
Hub Descriptor:
  bLength              12
  bDescriptorType      42
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  bHubDecLat          0.0 micro seconds
  wHubDelay             0 nano seconds
  DeviceRemovable    0x00
 Hub Port Status:
   Port 1: 0000.02a0 5Gbps power Rx.Detect
   Port 2: 0000.02a0 5Gbps power Rx.Detect
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           15
  bNumDeviceCaps          1
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
    wSpeedsSupported   0x0008
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   3
      Lowest fully-functional device speed is SuperSpeed (5Gbps)
    bU1DevExitLat          10 micro seconds
    bU2DevExitLat         512 micro seconds
Device Status:     0x0001
  Self Powered
Hardware demonstration

We need to list at least one hardware here to demonstrate which driver that is used. I confirm that I can use USB 3.0 speed on this hardware device too.

lspci
00:14.0 USB controller: Intel Corporation Device a2af
sudo lspci -nnk
00:14.0 USB controller [0c03]: Intel Corporation Device [8086:a2af]
	Subsystem: Gigabyte Technology Co., Ltd Device [1458:5007]
	Kernel driver in use: xhci_hcd
cat /sys/bus/pci/devices/0000\:00\:14.0/usb2/idVendor
1d6b
cat /sys/bus/pci/devices/0000\:00\:14.0/usb2/idProduct
0003
References
El contenido de esta página está en Dominio Público. (vea la página CC0 para información detallada). Cualquiera es libre de copiar, modificar, publicar, usar, vender o distribuir el texto para cualquier propósito, comercial o no comercial, y por cualquier medio.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information