Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
differences in the entry: vendor
Intel-Corporation Intel-Corp.
differences in the entry: model name
Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller 2 (rev 02)
differences in the entry: possible other names of the device
Dell 82801H (ICH8 Family) USB2 EHCI Controller
differences in the entry: subtype (laser, inkjet, ..)
usb-controller heci-controller
differences in the entry: VendorID:ProductID code of the device
8086:283a
differences in the entry: year of commercialization
not-specified 2007
differences in the entry: interface
not-specified USB
differences in the entry: GNU/Linux distribution used for the test
parabola, trisquel_5_5
differences in the entry: tested with the following kernel libre
5.4.2-gnu-1, 3.0.0-17-generic
differences in the entry: does it work with free software?
yes
differences in the entry: free driver used
ehci_hcd
differences in the entry: Description
[code]lspci -nnpk
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02)
[/code]
[code]lspci -vmmnn
Slot: 00:1a.7
Class: USB controller [0c03]
Vendor: Intel Corporation [8086]
Device: 82801H (ICH8 Family) USB2 EHCI Controller #2 [283a]
SVendor: Intel Corporation [8086]
SDevice: Device [514d]
Rev: 02
ProgIf: 20
[/code]
[p]lspci -vvnnk[/p]
[code]00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell 82801H (ICH8 Family) USB2 EHCI Controller [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci[/code]
The contents of this page are in the Public Domain. (see the
CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
