Differences between the revision of 22:12, 1 July 2017, created by DavidHedlund, and the revision of 22:11, 1 July 2017
Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
Unterschiede: Hersteller
Linux-Foundation
Unterschiede: Modellbezeichnung
Linux Foundation 3.0 root hub
Unterschiede: Andere mögliche Gerätenamen
Unterschiede: Typ (laser, inkjet, ..)
usb-controller
Unterschiede: Hersteller-ID:Produkt-ID des Gerätes
1d6b:0003
Unterschiede: Jahr der Markteinführung
not-specified
Unterschiede: Schnittstelle
USB
Unterschiede: Verwendete GNU/Linux-Distribution für die Überprüfung
trisquel_7_0
Unterschiede: Überbrüft mit folgendem freien Betriebssystemkern (Libre Kernel)
Linux-libre 3.13.0-121-lowlatency
Unterschiede: Funktioniert mit Freie Software?
yes
Unterschiede: Verwendete Freie Firmware/Treiber
xhci_hcd
Unterschiede: Beschreibung
[p]We need to list at least one hardware here to demonstrate which driver that is used. I confirm that I can use USB 3.0 speed on this hardware device too.[/p]

[h1]Gigabyte GA-Z270-Gaming K3[/h1]
I just list one of the USB 3.0 devices and its connected USB controller here to make the list short and concise.

[h2]USB device[/h2]

lsusb
[code]
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
[/code]

sudo lsusb -vd 1d6b:
[code]

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x1d6b Linux Foundation
idProduct 0x0003 3.0 root hub
bcdDevice 3.13
iManufacturer 3 Linux 3.13.0-121-lowlatency xhci_hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:03:00.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 31
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
bMaxBurst 0
Hub Descriptor:
bLength 12
bDescriptorType 42
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
bHubDecLat 0.0 micro seconds
wHubDelay 0 nano seconds
DeviceRemovable 0x00
Hub Port Status:
Port 1: 0000.02a0 5Gbps power Rx.Detect
Port 2: 0000.02a0 5Gbps power Rx.Detect
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 15
bNumDeviceCaps 1
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x0008
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 3
Lowest fully-functional device speed is SuperSpeed (5Gbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 512 micro seconds
Device Status: 0x0001
Self Powered
[/code]

[h2]USB controller[/h2]
lspci
[code]
00:14.0 USB controller: Intel Corporation Device a2af
[/code]

sudo lspci -nnk
[code]
00:14.0 USB controller [0c03]: Intel Corporation Device [8086:a2af]
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5007]
Kernel driver in use: xhci_hcd
[/code]

cat /sys/bus/pci/devices/0000\:00\:14.0/usb2/idVendor
[code]
1d6b
[/code]

cat /sys/bus/pci/devices/0000\:00\:14.0/usb2/idProduct
[code]
0003
[/code]

[h1]References[/h1]
[list]
[*][a]https://certification.ubuntu.com/catalog/component/usb/4034/1d6b%3A0003/ | Linux Foundation 3.0 root hub[/a][/*]
[/list]
The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information