Home » Hardware » host controllers » SB7x0/SB8x0/SB9x0 USB EHCI Controller » Historie » Unterschiede
Differences between the revision of 20:47, 7 September 2020, created by mangeurdenuage, and the revision of 10:47, 8 August 2020
Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
Unterschiede: Hersteller
Advanced-Micro-Devices-Inc.-AMD-ATI
Unterschiede: Modellbezeichnung
SB7x0/SB8x0/SB9x0 USB EHCI Controller
Unterschiede: Andere mögliche Gerätenamen
Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
Hewlett-Packard Company SB7x0/SB8x0/SB9x0 USB EHCI Controller
Unterschiede: Typ (laser, inkjet, ..)
usb-controller
Unterschiede: Hersteller-ID:Produkt-ID des Gerätes
1002:4396
Unterschiede: Jahr der Markteinführung
not-specified
Unterschiede: Schnittstelle
not-specified
Unterschiede: Verwendete GNU/Linux-Distribution für die Überprüfung
trisquel_6_0 , debian_10
Unterschiede: Überbrüft mit folgendem freien Betriebssystemkern (Libre Kernel)
3.2.0-48-generic, 4.19.0-9-amd64
Unterschiede: Funktioniert mit Freie Software?
yes
Unterschiede: Verwendete Freie Firmware/Treiber
ehci-pci
Unterschiede: Beschreibung
[p]lspci -vvnnk[/p]
[code]00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company SB7x0/SB8x0/SB9x0 USB EHCI Controller [103c:142c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at 94404000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
[/code]
The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information