Home » Hardware » ethernet cards » Madge Networks Smart 16/4 PCI Ringnode Mk2
ethernet card Madge Networks Smart 16/4 PCI Ringnode Mk2
Modell: Madge Networks Smart 16/4 PCI Ringnode Mk2(Modell-ID: 2122)
Madge Networks
Hersteller-ID:Produkt-ID des Gerätes:
Jahr der Markteinführung:
überprüft mit Distribution:
Parabola GNU/Linux
Überbrüft mit folgendem freien Betriebssystemkern (Libre Kernel):
Funktioniert mit Freie Software?
Verwendete Freie Firmware/Treiber:

It can't do anything besides blinking the two leds on the ethernet port, there is no kernel module. Tested on 2 identical cards.

lspci -vvnnk

03:02.0 Token ring network controller [0201]: Madge Networks Smart 16/4 PCI Ringnode Mk2 [10b6:0002]
        Subsystem: Madge Networks Smart 16/4 PCI Ringnode Mk2 [10b6:0002]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 15
        Region 0: I/O ports at e800 [size=256]
        Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
        Expansion ROM at fea00000 [disabled] [size=1M]

hwinfo --netcard

  14: PCI 302.0: 0201 Token ring network controller
  [Created at pci.386]
  Unique ID: 08OF.tPC7MNzlGbD
  Parent ID: 6NW+.RlqjBL7v2IB
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:02.0
  SysFS BusID: 0000:03:02.0
  Hardware Class: network
  Model: "Madge Networks Smart 16/4 PCI Ringnode Mk2"
  Vendor: pci 0x10b6 "Madge Networks"
  Device: pci 0x0002 "Smart 16/4 PCI Ringnode Mk2"
  SubVendor: pci 0x10b6 "Madge Networks"
  SubDevice: pci 0x0002 "Smart 16/4 PCI Ringnode Mk2"
  I/O Ports: 0xe800-0xe8ff (rw)
  Memory Range: 0xfebffc00-0xfebffcff (rw,non-prefetchable)
  Memory Range: 0xfea00000-0xfeafffff (ro,non-prefetchable,disabled)
  IRQ: 15 (no events)
  Module Alias: "pci:v000010B6d00000002sv000010B6sd00000002bc02sc01i00"
  Driver Info #0:
    Driver Status: abyss is not active
    Driver Activation Cmd: "modprobe abyss"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #15 (PCI bridge)

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information