Differences between the revision of 07:19, 14 January 2020, created by parajh7, and the revision of 09:06, 30 October 2012
Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
differences in the entry: vendor
Broadcom-Corporation
differences in the entry: model name
Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02)
differences in the entry: possible other names of the device
Dell NetXtreme BCM5755M Gigabit Ethernet PCI Express
differences in the entry: VendorID:ProductID code of the device
14e4:1673
differences in the entry: year of commercialization
not-specified 2007
differences in the entry: interface
not-specified
differences in the entry: GNU/Linux distribution used for the test
parabola, trisquel_4_5 , trisquel_5_5
differences in the entry: tested with the following kernel libre
5.4.2-gnu-1, 2.6.35-28-generic, 3.0.0-17-generic
differences in the entry: does it work with free software?
yes
differences in the entry: free driver used
tg3
differences in the entry: Description
[p]The tg3 module is absent in the libre kernel due to certain models requiring proprietary blobs, so in distros like Parabola it is not working without recompiling the kernel. See [a]https://h-node.org/ethernetcards/view/en/415/Broadcom-Corporation-NetXtreme-BCM5782-Gigabit-Ethernet/2/1/Broadcom-Corporation/undef/undef/undef/ethernet-works/undef [/a]for more info[/p]
[p]lspci -vmmnn[/p]
[code]
Slot: 09:00.0
Class: Ethernet controller [0200]
Vendor: Broadcom Corporation [14e4]
Device: NetXtreme BCM5755M Gigabit Ethernet PCI Express [1673]
SVendor: Dell [1028]
SDevice: Device [01f9]
Rev: 02
[/code]

[p]lspci -nnk[/p]
[code]
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express [14e4:1673] (rev 02)
Subsystem: Dell Device [1028:01f9]
Kernel driver in use: tg3
Kernel modules: tg3
[/code]
[p]lspci -vvnnk[/p]
[code]09:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5755M Gigabit Ethernet PCI Express [14e4:1673] (rev 02)
Subsystem: Dell NetXtreme BCM5755M Gigabit Ethernet PCI Express [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe7f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
Read-only fields:
[PN] Part number: BCM95755m
[EC] Engineering changes: 01f9.004
[SN] Serial number: 0123456789
[MN] Manufacture ID: 14e4
[RV] Reserved: checksum good, 28 byte(s) reserved
Read/write fields:
[YA] Asset tag: XYZ01234567
[RW] Read-write area: 107 byte(s) free
End
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 50236c306080bf94 Data: bf36
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 6.500W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-1c-23-ff-fe-1e-18-00
Capabilities: [16c v1] Power Budgeting <?>[/code]
The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information